Spyder Motorcycle Accessories For Sale

Stock #: VRB-328-8004

Description: Rear Street Tire manufactured by Vee Rubber
Stock # VRB-328-8004
225/50-R15 68H and 80H
$250 each + install

Specially designed for 3-wheeled motorcycle usage in wet and dry conditions.
Excellent performance for acceleration and braking.
Heavy duty construction for the extra weight of 3-wheeled motorcycles and 2-up riding.
Newly formulated compound for exceptional mileage.

Stock #: VRB-328-8003

Description: Front Street Tire manufactured by Vee Rubber
Stock # VRB-328-8003
165/65-R14 47H
165/55-R15 55H
$127 each + install
(2 required for Can Am Spyder)

Specially designed for 3-wheeled motorcycle usage in wet and dry conditions.
Excellent performance for acceleration and braking.
Heavy duty construction for the extra weight of 3-wheeled motorcycles and 2-up riding.
Newly formulated compound for exceptional mileage.

Stock #: BBP-41-172

Description: Here's an exceptional quality Multi-Function LED Trunk Light for the Can-Am RT. This new trunk light offers running light, brake light and turn signal functionality in a single compact unit. It uses small ultra-efficient high intensity LED’s, offering superb brightness with low power usage. The LED assemblies are enclosed in weather resistant pods that are sealed to provide all-weather protection and maintenance free lighting. Superior functionality combined with a stylish contoured chrome housing that mounts low enough to allow fitment of luggage racks. Attaches with double sided tape for a secure installation. Requires drilling to run the wire lead which mounts to existing LED wiring with T-Taps, no additional components are needed. Fits all Can-Am RT’s from 2010.
LED TRUNK LIGHT, Brake & Turn Signals, For Can-Am Spyder RT 2010-

Stock #: BBP-41-155

Description: This Tubular Luggage Rack is 22 ½” x 13 ½” to accommodate standard luggage bags. Mounts with custom tapered washers to protect the RT lid from cracks. Finished in Show Chrome Accessories® durable chrome finish.

TOUR TRUNK RACK, For Can Am Spyder RT

Stock #: BBP-41-161R

Description: This all new Red LED Marker Light replaces the side red saddlebag reflector on the Spyder RT. Big Bike Parts® custom designed the light to match thenatural lines of the Spyder RT and provide better visibility by using a more convex lens. With 16 LEDs per side, safety is markedly improved by making the Spyder RT more visible. These LED Marker Lights can be wired as running, turnsignal or both.Sold as a Pair.
RED LED MARKER LIGHT, & Turnsignal 32 LED's, For Can Am Spyder RT, Saddlebags

Stock #: BBP-41-173

Description: For the Can Am Spyder, this new reflector replaces the OEM front reflectors with custom ultra-efficient high intensity LED’s, offering superb brightness in a reflector that includes running and turn signal functionality. Replace the OEM front fender center reflectors with an amber Multi-Function Front Fender Center LED Lights housing 32 SMD LED’s. Replace the OEM front rear facing reflectors with Big Bike Parts®red Multi-Function Front Fender Rear Facing LED Lights housing 24 SMD LED’s. The LED assemblies are sealed for all-weather protection and maintenance free lighting. No drilling required. Mounts to existing LED wiring with T-Taps, no additional components are needed. Both are priced affordably starting at $129.95. Fits all Can Am Spyder RS-S, ST-S, RT-S, ST-LTD, RT-LTD 2013 and newer.
FRONT FENDER LED CENTER , Reflector Running/Turn signal, For Can-Am Spyder 2013 - RS-S, ST-S, ST-LTD, RT-S, RT-LTD, 32 SMD LED's

Stock #: BBP-41-168

Description: Can-Am riders rejoice! With the Smart Mount™ Backrest system, riders can now choose between our original 8 3/8” x 6” lumbar pad and our new 12 3/8” x 7” full support pad, providing each rider with an option to fit their needs best. This new pad is over 70% larger providing more support and contact area. All our Smart Mount™ Backrest systems include our unique pad hinge and adjustable tongue which allows pad adjustment up and down with 1” of adjustment, comes complete with instructions and all required hardware. Includes handy removable storage pouch on backrest pad.
SMART MOUNT BACKREST, Large Pad, For Can-Am Spyder RT, Made in USA

Stock #: BBP-41-158

Description: This Smart Mount™ Backrest System for the Can Am Spyder RT greatly increases comfort for the driver. It features Big Bike Parts® copyrighted pad hinge and adjustable tongue, allowing the backrest pad to mount up or down vertically with 1” of adjustment, as well as 2" of horizontal adjustment. Comes complete with a handy storage pouch that attaches to the back of the backrest, hardware, and instructions.

SMART MOUNT BACKREST, Through The Seat Hardware, For Can Am Spyder RT, Made in USA

Stock #: BBP-41-159

Description: This Passenger armrest kit works along with, and matches the Smart Mount™ Backrest System. The armrests mount under the seat, to the frame, for superior stability and pivots out of the way for easy passenger access. Fits the Can Am Spyder RT.

DELUXE ARMREST SYSTEM, Black, For Can Am RT Passenger

Stock #: BBP-52-836

Description: Big Bike Parts® introduces Chrome Beverage Holders for your motorcycle. Choose from either a Driver Handlebar Mount or Passenger Armrest Mount. Each Beverage Holder has been designed for easy installation and removal, just install the bracket and the beverage holder itself can be quickly snapped into place or removed. Beverage Holder models for Can-Am Spyder RT, Goldwings & most handlebar face clamps with 32-35mm screw spacing. The Passenger Armrest Mount works with Big Bike Parts® Passenger Armrest Kits BBP # 52-771, 52-677A, 52-672, 2-477 and 41-159 as well as Markland and other armrests. No plastic here! Made from durable steel with Show Chrome Accessories quality chrome finish for unequaled performance. Added security is available with a set screw to ensure it does not walk away while you are away.
ARMREST PAD SET, Beverage Holder, Fits Big Bike Parts Armrest Pads, Gold Wing, Can-Am

Stock #: BBP-41-174

Description: BBP-41-174 - FRONT FENDER LED REFLECTOR (New)
Be seen, be safe with Big Bike Parts® newest lighting accessories for the Can Am Spyder. It replaces the OEM front reflectors with custom ultra-efficient high intensity LED’s, offering superb brightness in a reflector that includes running and turn signal functionality. Replace the OEM front fender center reflectors with Big Bike Parts® amber Multi-Function Front Fender Center LED Lights housing 32 SMD LED’s. Replace the OEM front rear facing reflectors with a red Multi-Function Front Fender Rear Facing LED Lights housing 24 SMD LED’s. The LED assemblies are sealed for all-weather protection and maintenance free lighting. No drilling required. Mounts to existing LED wiring with T-Taps, no additional components are needed. Both are priced affordably starting at $129.95. Fits all Can Am Spyder RS-S, ST-S, RT-S, ST-LTD, RT-LTD 2013 and newer.
FRONT FENDER REAR LED, Reflector - Running/Turn signal, For Can-Am Spyder 2013 - RS-S, ST-S, ST-LTD, RT-S, RT-LTD, 24 SMD LED's

Stock #: BBP-4-475BC

Description: This Black over Charcoal Cover is designed for the Can Am Spyder RT. The Classic Series line of covers offers exceptional value without compromising the features you have come to expect from UltraGard®.

Tailor fit designs take into account the natural stance of your motorcycle.
Water resistant polyurethane coated polyester, protects against weather, dirt and pollution.
UV stabilized to maximize fabric life and minimize color fading from sun exposure.
Scorch resistant heat shield protects the cover from hot exhaust pipes and allows use of cover immediately after riding.
Double stitched, four fold interlocking seams to provide the best durability and water tight closure.
SoftTek windshield liner to prevent scratching.
Large rust-proof grommets prevent tearing.
Sewn elastic hem and bungee cord ensures a tight custom fit.
High visibility reflective logo adds safety while parked.
Convenient and compact storage pouch is easily portable.
Five year warranty.
ULTRAGARD CAN AM RT COVER, Black Over Charcoal, For Can Am Spyder RT Series

Stock #: BBP-4-455BC

Description: This Black over Charcoal medium cover will fit Can Am GS/RS/ST(see fitment chart for details). The Classic Series line of covers offers exceptional value without compromising the features you have come to expect from UltraGard®.

Tailor fit designs take into account the natural stance of your motorcycle.
Water resistant polyurethane coated polyester, protects against weather, dirt and pollution.
UV stabilized to maximize fabric life and minimize color fading from sun exposure.
Scorch resistant heat shield protects the cover from hot exhaust pipes and allows use of cover immediately after riding.
Double stitched, four fold interlocking seams to provide the best durability and water tight closure.
SoftTek windshield liner to prevent scratching.
Large rust-proof grommets prevent tearing.
Sewn elastic hem and bungee cord ensures a tight custom fit.
High visibility reflective logo adds safety while parked.
Convenient and compact storage pouch is easily portable.
Five year warranty.
ULTRAGARD CAN AM COVER, Black Over Charcoal, For Can Am Spyder GS/RS/ST

Stock #: BBP-4-475AB

Description: This Cranberry over Black Cover is designed for the the Can Am Spyder RT. The Classic Series line of covers offers exceptional value without compromising the features you have come to expect from UltraGard®.

Tailor fit designs take into account the natural stance of your motorcycle.
Water resistant polyurethane coated polyester, protects against weather, dirt and pollution.
UV stabilized to maximize fabric life and minimize color fading from sun exposure.
Scorch resistant heat shield protects the cover from hot exhaust pipes and allows use of cover immediately after riding.
Double stitched, four fold interlocking seams to provide the best durability and water tight closure.
SoftTek windshield liner to prevent scratching.
Large rust-proof grommets prevent tearing.
Sewn elastic hem and bungee cord ensures a tight custom fit.
High visibility reflective logo adds safety while parked.
Convenient and compact storage pouch is easily portable.
Five year warranty.
ULTRAGARD CAN AM RT COVER, Cranberry Over Black, For Can Am Spyder RT Series

Stock #: BBP-41-162

Description: This harness isolates the load between the motorcycle and trailer through the use of four fully automatic circuit breakers to prevent electrical feedback. The heavy duty circuit board can handle a continuous 16 amp steady load, with further protection provided with a separate 15 amp inline fuse from the power source. Easily plugs into the OEM Can-Am RT wire harness with no on bike splicing required. Works with 5-pin trailer connectors, not included.
TRAILER WIRING HARNESS, Electronically Isolated, For Can-Am Spyder RT 2010-14

Stock #: BBP-41-164

Description: TRAILER HITCH CAN-AM, Spyder RT/RS/ST/GS, Fits 2008-14

It has a durable black powder coat finish and mounts without removal of the rear tire or its axle. Once installed, removal is easy with only six bolts to pull if you want the hitch assembly off for a special trip or occasion. Includes all hardware and instructions. A mud flap can be easily mounted with included brace brackets and mounting holes. Mud flap not included. The receiver mount has a ¾” hole for your choice of ball type. This hitch fits Spyder RT, RS, ST and GS. Made in USA

Stock #: MBL-F3-LUGG

Description: F3 Detachable Luggage Rack with Spyder laser cut into the center. Black Powder Coated, sturdy, easy to remove when not required.

Stock #: BBP-41-165

Description: Big Bike Parts® introduces Chrome Beverage Holders for your motorcycle. Choose from either a Driver Handlebar Mount or Passenger Armrest Mount. Each Beverage Holder has been designed for easy installation and removal, just install the bracket and the beverage holder itself can be quickly snapped into place or removed. Beverage Holder models for Can-Am Spyder RT, Goldwings & most handlebar face clamps with 32-35mm screw spacing. The Passenger Armrest Mount works with Big Bike Parts® Passenger Armrest Kits BBP # 52-771, 52-677A, 52-672, 2-477 and 41-159 as well as Markland and other armrests. No plastic here! Made from durable steel with Show Chrome Accessories quality chrome finish for unequaled performance. Added security is available with a set screw to ensure it does not walk away while you are away.
BEVERAGE HOLDER, Handlebar Mount, For Can-Am Spyder RT, 2010-14

Stock #: BBP-41-163

Description: Quality is evident on this new Chrome Handlebar Cover for the Can-Am RT. This ABS accessory fits like an OEM part and is held secure with double sided tape. The area over the bars has nice recessed contours to match the OEM bar styling. The pre-marked cut out for the GPS pendant plug access makes adding the OEM GPS system a snap. Fits RT 2010-2014.

Stock #: BBP-41-166

Description: Here's another must have accessory for the Can-Am RT. The new Mudflap Extension Accent looks so natural on the Can-Am RT it should be a stock accessory. Big Bike Parts® Mudflap Extension Accent extends the OEM rear mudflap by 5”, minimizing debris kick up to following riders and is a needed requirement when pulling a trailer to reduce chipping. A decorative chrome accent makes the OEM fender and Big Bike Parts® Mudflap Extension Accent look as one. Attaches easily with double sided tape and 2 screws. Works with most trailer hitches, including the #BBP-41-164 Spyder Hitch.

REAR MUD FLAP ACCENT, For Can-Am RT 2010-, Extends Existing 5" in Total Length

Stock #: BBP-41-154

Description: This stylish Vantage Board kit replaces both the OEM driver pegs and mounts. The solid cast mount has our anti-rotation system designed right in. The Vantage boards are CNC Aluminum with a brilliant chrome finish, with raised rubber comfort pads. For Can Am RT electronic shift.

FLOORBOARD KIT CAN AM RT, Vantage Board Driver, For Can Am RT SE5

Stock #: BBP-41-157

Description: This stylish Passenger Vantage Board kit replaces both the OEM pegs and mounts. The solid cast mount has our anti-rotation system designed right in. The Vantage boards are CNC Aluminum with a brilliant chrome finish, with raised rubber comfort pads. For Can Am Spyder RT.

FLOORBOARD KIT CAN AM RT, Vantage Board Passenger, For Can Am Spyder RT - 4 7/8" Vertical, Adjustment - 1 1/8" Down, 3/4" Up Over OEM

Stock #: BBP-41-151A

Description: This marker light is thicker than OEM and contoured to better match the lines of the front fender and can be wired as either running or running and turn signal. With 16 LED’s per side safety is markedly improved by being more visible and putting a turn signal on the side. For original style Can Am Spyder front fenders. Sold as a pair.
AMBER LED MARKER LIGHT, & Turnsignal - 32 LED's, For Can Am Spyder

Stock #: BBP-41-160

Description: This is a chrome and rubber scuff wear bar accent for the 2010- 13 Spyder RT. The accent is held securely in place with double sided tape and four screws and comes with a set of replacement EPDM rubber wear strips. The rubber wear strips are secured in place by screws to minimize potential loss.
With EPDM Rubber Scuff Pads, For Can Am RT Spyder 2010- 13

Stock #: BBP-41-169

Description: FRONT COWL SCUFF ACCENT, with Rubber Scuff Pads, For Can-Am RT SPYDER 2014-

This wear bar has proven to be a must have accessory for 2010-2013 RT owners, and is now available for the 2014 RT. The accent is made of durable chrome ABS and is held securely in place with double sided adhesive tape. Big Bike Parts® includes an additional set of EPDM rubber wear strips as replacement when the first set of rubber wear strips get too worn. Each rubber wear strip is held securely in position with 2 locking tabs, double sided tape and a set screw to hold firm against stronger impacts. This is a great accessory to protect the nose of your Can-Am and dress it up with a bit of chrome!

Stock #: BBP-41-150

Description: These attractive accents fit just behind the fender marker lights on your Can Am Spyder, giving them a more prominent look. Fits both Spyder RS and RT fenders with double sided tape provided.

FENDER ACCENT TRIM, ABS Contoured Chrome, For Can Am Spyder 2008

Stock #: BBP-41-170

Description: LAMPGARD HEADLIGHT , Protector Acrylic, For Can-Am RT 2010-, Made in USA
The most recent addition is a set of LampGard ™ headlight protectors for the popular Can-Am RT. EachLampGard™ protector is molded to match the headlight shape and produced from extremely durable acrylic. Acrylic is a good impact resistant material which absorbs the impact from debris, unlike thin applied skins that apply to your headlight and havelittle impact absorption capability. LampGard™ truly protects by creating an air space between the LampGard™ and your headlight which becomes a void to help absorb any impact before it damages your headlight. Each LampGard™ is held in place by 4pair of round dual lock clear fasteners that have hi-temp adhesive to stay put on the headlight in all weather conditions. For the Can-Am RT 2010-14. Sold as pair.

Stock #: BBP-41-156

Description: This 3 Piece Lid Net Set easily hold items in the lid recess with a bungee net. Durable nylon clips mount to existing screws and hold the net in place with 'S' hooks and allow for easy access. This 3 piece lid net set is a great addition for the Can Am Spyder RT.

3 PC LID NET SET, Trunk - Saddlebags, For Can Am Spyder RT

Stock #: BBP-HCTL-1100

Description: The Hopnel™ division of Big Bike Parts® introduces convenience in storage with their Saddlebag and Trunk Liners for the Can Am Spyder RT. The 850 Saddlebag Liner measures a generous 15” x 10 ¾” x 9 ¼” for the RT hard bag and are sold each. The all new 1100 Trunk Liner set is actually 2 bags stacked, to take advantage of the deep rear Spyder RT Trunk. The lower liner is great for storing on the bike maintenance items in its handy 10 ¾” x 7 ¼” x 7” size. The upper liner is great for travel packing in its 15 ¾” x 10” x 8” cavity, both neatly fitting into the Spyder RT Trunk. All Saddlebag and Trunk Liners by Hopnel™ have stitched easy to grab sturdy carry handles.
1100 TRUNK LINER SET, 15.75" x 10" x 8" &, 10.75" x 7.25" x 7", For Can Am Spyder RT 2 Bag Set

Stock #: BBP-HCSL-850

Description: The Hopnel™ division of Big Bike Parts® introduces convenience in storage with their Saddlebag and Trunk Liners for the Can Am Spyder RT. The 850 Saddlebag Liner measures a generous 15” x 10 ¾” x 9 ¼” for the RT hard bag and are sold each. The all new 1100 Trunk Liner set is actually 2 bags stacked, to take advantage of the deep rear Spyder RT Trunk. The lower liner is great for storing on the bike maintenance items in its handy 10 ¾” x 7 ¼” x 7” size. The upper liner is great for travel packing in its 15 ¾” x 10” x 8” cavity, both neatly fitting into the Spyder RT Trunk. All Saddlebag and Trunk Liners by Hopnel™ have stitched easy to grab sturdy carry handles.
850 SADDLEBAG LINER, 15" x 10.75" x 9.25", For Can Am RT

Stock #: BBP-HCFL-1500

Description: It’s finally here! A cost effective liner for the spacious front trunk on the Can Am Spyder. The 1500 Front Trunk Liner from Hopnel™ comes with a sturdy grab handle and 2 padded backpack straps to make removal and carry an easy task. The 1500Front Trunk Liner measures a generous 23” tall by 20 ½” wide by 13 ½” across.
1500 FRONT TRUNK LINER, 23" x 20.5" x 13.5", For Can Am Spyder

Stock #: BBP-H41TPC-2BK

Description: Hopnel™ introduces a new Premium Double Tank Pouch for the Can Am RT that slips over the glove box door. Its felt lined back panel avoids scratches to the finish and the double pouch design with UV stabilized clear face allows access to cellphone screens or GPS display. The large main pocket is zippered and measures 5 ¼” wide by 7” tall and 1 ½” thick, with the clear pouch measuring 3 ½” wide by 6” tall by 1” thick. Fits Can Am Spyder RT.
PREMIUM DOUBLE POCKET, For Can- Am RT, 3 1/2" x 6" x 1" Clear GPS, 5 1/4" x 7" x 1 1/2" Main Pouch

Stock #: BBP-H41TMPS-2BK

Description: The Hopnel™ division of Big Bike Parts® adds yet another all new storage system for the Can-Am RT. This unique tank map and pouch system has 4 distinct items that can be interchanged to make 3 unique storage systems, making this system a true multi-function product. The large main pocket is zippered and measures 5 ¼” wide by 7” tall and 1 ½” thick and slips over the glove box door. Its back is felt lined to avoid scratches to your bikes finish. The pouch contains our Buddy Lock system, allowing you to lock in the separate smaller 3 ½” x 6” by 1” pouch that comes with a UV stabilized clear face to allow visual access to cell or GPS screens. Quickly remove the smaller pouch with a twist and replace it with the 10 ½" X 12 ¼”Map pouch, which easily holds any paper map or even a full size iPad to provide a moving map. Also included is a belt attachment that allows the smaller pouch to clip to your belt allowing you to easily carry a cell phone, glasses or other necessities.
PREMIUM TANK MAP POUCH, System For Can Am RT, 5 1/4" x 7" Large Pouch, 3 1/2" x 6", Small Pouch, Map Pouch, Belt Clip

Stock #: BBP-H41-154BK

Description: The Hopnel™ division of Big Bike Parts® introduces an all new Windshield Dash Pouch System for the Can Am Spyder RT. The new RT Tri-Pouch System, H41-154BK, is a new design of our 3 distinct pouches, with improved adhesive to the textured dash at highway speeds. The center pouch compartment is a generous 9” x 6” x 2” and 2 side compartments each measuring 5” x 4” x 1.5”. All pouches close with a zipper to insure nothing falls out while riding.
WINDSHIELD DASH TRI POUCH, Black, For Can Am RT/RTS/RT-LTD

Stock #: BBP-H41-153BK

Description: he Hopnel™ division of Big Bike Parts® introduces an all new Windshield Dash Pouch System for the Can Am Spyder ST / STS / ST- LTD. This Single Pouch System, H41-153BK, is designed to mount to the textured dash with special adhesive hook and loop and is a large 9” x 6” x 2”. Pouch closes with a zipper to insure nothing falls out while riding. Can also be used a single pouch on RT / RTS / RT-LTD.
WINDSHIELD DASH POUCH, Black 9" x 6" x 2", For Can Am ST/STS/ST-LTD, Also Can Be Used On RT/RTS/RT-LTD

Stock #: BBP-4-250

Description: These charcoal Hopnel™ Cubby Stuff Sacs™ are ideal for quick packing of large to small items in saddlebags or trunk. Sacs close securely with drawstring and barrel lock, and are made of durable rip-stop polyester so they will not wear or tear easily. Cubby Stuff Sacs™ come as a set of 3 Sacs. Sac sizes include one 4.5" x 8.5", one 5.5" x 11.5" and one 7.75" x 13.5".

Stock #: BBP-H41-156BK

Description: The Hopnel™ division of Big Bike Parts® introduces its third Can-Am Dash Pouch System with a new single pouch for the GS and RS riders. This generous 10” x 5-¾” x 2” Dash Pouch is shaped to fit the GS / RS sloped dash. It closes easily and securely with a full width zipper insuring nothing falls out while riding. Mounts with special adhesive hook and loop to the textured dash surface.
WINDSHIELD DASH POUCH, Black, For Can-Am RS/RS-S/GS, 10" x 5 3/4" x 2

Stock #: BBP-H41-155BKC

Description: The BBP-H41-155BKC Single Pouch is designed to fit either the Can-Am RS or Victory XC Adjustable Flip Baggershield. This system has a large 8” x 4” Clear cell phone pocket and a generous 10” x 4” x 2” Pouch. Cell phones, MP3 Players or other devices load from inside the sleeve keeping rain out and devices dry. The Clear UV stabilized surface allows easy screen reading and will hold up in the toughest environments.
SINGLE POUCH WITH CELL, Pocket for Adjustable Flip, Baggershield - Can Am RS, Victory XC - BBP 20-121

Stock #: BBP-HD90-112BEV

Description: This Classic bottle holder works interchangeably with Big Bike Parts EZ mount system, adding water bottle functionality to any place you have an EZ mount installed. These Beverage holders are featured on our HD90-112BKL and HD90-112BKR and can be placed on the HD90-111BK instead of the pouches. This 6 ½” x 3” x 5” Bottle Holder twists into the EZ Mount™ and holds up to a 3” diameter bottle(Not Included).
CLASSIC BOTTLE HOLDER ONLY, EZ Mount System, Holds up to 3" Diameter Bottle, 6 1/2" x 3" x 5"

Stock #: BBP-H41-157BK

Description: An attractive finish saving accessory designed to reduce the nicks, chips, and bugs that pummel the front cowl and front trunk of the Can-Am RT. This two piece Front Cowl and Trunk Bra Set has a tailored bra for the front trunk and another tailored sewn wrap for the front lower intake cowl. The Front Cowl and Trunk Bra Set greatly reduces the road rash the Can-Am RT takes, and provides a clean blacked-out look to the front cowl. Both the upper and the lower bras wrap into the front trunk lip and are held securely in place with special adhesive backed hook and stitched loop. Available in black only and made in the USA.
FRONT COWL & TRUNK BRA, For Can-Am RT 2014

Stock #: BBP-H41-158BK

Description: FRONT COWL & TRUNK BRA, For Can-Am RT 2010-13

Stock #: BBP-13-250A

Description: MOTORCYCLE SOUND SYSTEM, Waterproof 40 Watt Amplifier, Waterproof 2 1/2" Chrome Speakers, Universal 3.5mm Aux Input

The handlebar clamp mounts have been totally redesigned into a new saddle clamp that supports the speakers better and universally fits both bar sizes of 7/8” and 1”. The mirror mount brackets have also been redesigned by making them stiffer which will take out some of the bounce previously seen. The custom engineered big sound 2 ½” chrome speakers and 40 watt amplifier are still waterproof and provide sound quality unmatched by more expensive systems. The waterproof volume control with its 3.5mm universal aux-in connection is compatible with iPod, MP3, Portable Players and Satellite Radio Systems.

Stock #: BBP-13-250BK

Description: MOTORCYCLE STEREO SYSTEM, Black Waterproof System, 40 W Amplifier, 2 1/2" Black Speakers, Universal 3.5mm Audio Port

The handlebar clamp mounts have been totally redesigned into a new saddle clamp that supports the speakers better and universally fits both bar sizes of 7/8” and 1”. The mirror mount brackets has also been redesigned by making them stiffer which will take out some of the bounce previously seen. The custom engineered big sound 2 ½” black speakers and 40 watt amplifier are still waterproof and provide sound quality unmatched by more expensive systems. The waterproof volume control with its 3.5mm universal aux-in connection is compatible with iPod, MP3, Portable Players and Satellite Radio Systems.

Stock #: BBP-13-252BT

Description: WATERPROOF BLUETOOTH AUDIO, Chrome Waterproof System, 40 W Amplifier, 2 1/2" Chrome Speakers, Bluetooth Connectivity, Rev 'A' 6-16-14

Easily pairs with your Bluetooth device, while also retaining a 3.5mm Universal Aux-in connection for non-bluetooth devices allowing the use of your iPod, MP3, Satellite Radio or other hardwire plugs. Available with our custom engineered 2 1/2” chrome big sound speakers, with a Bluetooth compatible 40w waterproof amplifier. Universal clamps for both 7/8” or 1” handlebars and mirror mount brackets for alternating mounting.

Stock #: BBP-13-252BTBK

Description: WATERPROOF BLUETOOTH AUDIO, Black Waterproof System, 40 W Amplifier, 2 1/2" Black Speakers, Bluetooth Connectivity, Rev 'A' 6-16-14

Easily pairs with your Bluetooth device, while also retaining a 3.5mm Universal Aux-inconnection for non-bluetooth devices allowing the use of your iPod, MP3, Satellite Radio or other hardwire plugs. Available with our custom engineered 2 1/2” black big sound speakers, with a Bluetooth compatible 40w waterproof amplifier. Universal clamps for both 7/8” or 1” handlebars and mirror mount brackets for alternating mounting.

Stock #: BBP-20-121

Description: ADJUSTABLE FLIP WINDSHIELD, Adjusts From 14" to 21", For Can-Am Spyder RS, 3/16" Lucite Acrylic
Has a tinted lower section that hides a taller clear panel behind it. With a quick twist of the three thumb attachments, you can flip the clear panel into place and make a taller windshield for those times you need it. This versatility makes these windshields a perfect touring choice. Made from 3/16” DOT approved Lucite Acrylic. The Cam-Am Spyder RS adjusts from 14” to 20” and the Yamaha Royal Star Venture adjusts from 10-1/2” to 16-1/2”. Made in USA

Stock #: BBP-20-400

Description: CLEAR WINDSHIELD, 4 1/2" Wider than OEM, Can-Am RT 2010-, Anti Buffet Cut Out Vents

After analyzing the riders air envelope, it was determined that a windshield 4 ½” wider than OEM provided the rider with the best comfort zone. To improve the known turbulence behind the windshield Big Bike Parts® designed unique anti-buffet vents to smooth out the turbulence and noise. Made from clear 5/32” DOT acrylic, this replacement windshield is an affordable improvement over OEM stock.

Stock #: BBP-13-309

Description: This Dual USB Auxiliary Cigarette Element is designed to plug into a 12 volt cigarette lighter socket and allow charging of electronic devices via USB connections. This Auxiliary Cigarette Element has 2- USB plugs, providing a 2.1 Amp power supply with an LED indicator when properly connected. Compatible with iPads, iPhones, GPS and other devices.
DUAL USB CIGARETTE ELEMENT, USB 2.1 Amp Power Supply, LED on Indicator, iPad, iPod,, iPhone, GPS, PDA Compatible

Stock #: BBP-13-208

Description: It's an all new way to charge or power MP3, GPS, iPads and smartphones with their handlebar mounted 12 volt USB Charger. The dual USB ports are spaced far enough apart to allow use of the 2.1 amp and 1.0 amp ports at the same time. Black handlebar clamp allows attachment to either a 7/8” or 1” handlebar and the socket assembly can also be mounted into flat panel if desired.
DUAL PORT USB CHARGER, For MP3, GPS, iPhone, etc, Universal 12 Volt, 2.1 Amps &, 1.0 Amp Ports

Stock #: BBP-53-106A

Description: Chrome Flame Accents are easy to attach with double adhesive tape. Add a little fire to your powersports with these attractive chrome flames. Flames measure 6 inches long. Sold as a pair.
STICK ON FLAMES, 6" - Pair

Stock #: BBP-4-233S

Description: A 20 ounce insulated thermal mug and versatile mounting bracket that offers multiple positions for the mug. A patented compression ring snugly holds the mug in place giving your passenger a secure and easy way to stay hydrated on the long rides. Mounts To Underside Of Armrest.

Stock #: BBP-41-171

Description: Here's the all new Smart Mount for cell phones and GPS units to fit their existing handlebar and armrest mounts used with the Smart Mount Beverage Holders. This holder accommodates most Smartphones and GPS units up to 3 ½” wide when utilizing the included ½” expansion tabs. Rubber gripped back and foam side tabs hold your equipment securely in place. An additional single web strap is included for those that want a little more personal security on rough roads. Available by itself to fit your existing Smart Mount Beverage Holder Mounts or sold with either a handlebar mount or armrest mount.
GPS/PHONE HANDLEBAR MOUNT, For Can-Am Spyder RT, 2010-14

Stock #: BBP-52-840

Description: Big Bike Parts® introduces an all new Smart Mount for cell phones and GPS units to fit their existing handlebar and armrest mounts used with the Smart Mount Beverage Holders. This holder accommodates most Smartphones and GPS units up to 3 ½” wide when utilizing the included ½” expansion tabs. Rubber gripped back and foam side tabs hold your equipment securely in place. An additional single web strap is included for those that want a little more personal security on rough roads. Available by itself to fit your existing Smart Mount Beverage Holder Mounts or sold with either a handlebar mount or armrest mount.
GPS/PHONE ARMREST MOUNT, For Most Armrest Pads, By Big Bike Parts and others,, Gold Wing, Can-Am etc.

Stock #: BBP-41-167

Description: This new Gadget Bar snaps into the Smart Mount™ accessory receiver as used on their beverage holder and smart phone/GPS holder. The Gadget Bar’s 7/8’’ round tube and 4 ½’’ width allows for placement of additional handlebar mounted accessories and gadgets, should the need arise. This universal Gadget Bar will accept any attachment capable of mounting to a 7/8’’ handlebar, allowing you to bring everything and mount it within easy access. Can be ordered with a complete handlebar mount or separately to fit with your existing beverage or Smart Mount™ GPS/phone mount.
GADGET BAR FACE CLAMP, Handlebar Mount, For Can-Am RT SE 2010-15

Stock #: BBP-41-175

Description: Beachcomber Boards tip the scales of style and function with a fresh design. These new boards fill the demands of motorcycles in style, comfort and performance. Made from forged aluminum, the Beachcomber Boards are CNC milled for unparalleled strength and durability and finished with Show Chrome Accessories® brilliant chrome. The Beachcomber Board utilizes an anti-rotation system mount to allow fitments in a 360° range and insure the boards will not pivot once secured. A generous board size of 6 ¼” x 4” x 1” allows a comfortable foot rest and is available in a variety of fitments for driver, passenger or highway bars.
BEACHCOMBER PASSENGER, Adjustable, For Can Am RT - 4 7/8" Vertical, Adjustment 1 1/8" Down, 3/4" up over OE

Stock #: BBP-41-176

Description: Beachcomber Boards tip the scales of style and function with a fresh design. These new boards fill the demands of motorcycles in style, comfort and performance. Made from forged aluminum, the Beachcomber Boards are CNC milled for unparalleled strength and durability and finished with Show Chrome Accessories® brilliant chrome. The Beachcomber Board utilizes the anti-rotation system mount to allow fitments in a 360° range and insure the boards will not pivot once secured. A generous board size of 6 ¼” x 4” x 1” allows a comfortable foot rest and is available in a variety of fitments for driver, passenger or highway bars.
BEACHCOMBER DRIVER, For Can Am RT SE 2010-15, Not 2013-15 SSES or LTD

Stock #: BBP-52-535

Description: These decorative tapered chrome steel accent strips give the feel of winged flight. These accents are 19-3/4" long and can be used as fairing, fender or side cover accents on touring and cruiser motorcycles, trikes and trailers. Attaches with double sided tape provided.
CRUIS WING , 500 Accent Grilles, Fits Gold Wing, Cruisers, etc.

Stock #: BBP-53-103

Description: Chrome Flame Accents are easy to attach with double adhesive tape. Add a little fire to your powersports with these attractive chrome flames. Flames measure 3 1/4 inches long. Sold as a pair.
STICK ON FLAMES, 3 1/4" - Pair

Stock #: BBP-62-103

Description: These accents have a variety of installation options including: on fork caps, round reflectors, turn signals, fork horns, stem covers, carb covers, etc. Attaches with double sided tape included, 1-3/8" diameter.

Stock #: BBP-53-108A

Description: Chrome Flame Accents are easy to attach with double adhesive tape. Add a little fire to your powersports with these attractive chrome flames. Flames measure 8 inches long. Sold as a pair.
STICK ON FLAMES, 8" - Pair

Stock #: BBP-4-248

Description: This 13" flag pole features a patriotic golden eagle perched on the top. Item comes complete with heavy duty polyester 6" x 9" American flag and O-rings to keep flag in place. Flag pole clamps to any 1/2" tube such as a rack or rail, does not fold down.
12" FLAG POLE FOR 1/2" CLAMP, Non Folding with USA Flag

Stock #: BBP-4-240FR

Description: This French flag measures 6" x 9", is double sided, and made of heavy duty polyester. Fits 3/8" pole, comes with O-ring.

Stock #: BBP-4-240POW

Description: This POW-MIA flag measures 5-1/2" x 8", is double sided, made of heavy duty polyester, fits 3/8" pole, and comes with O-ring.
POW / MIA FLAG, 5 1/2" x 8" Double Sided, For 3/8" Pole with O'Ring, Heavy Duty Polyester

Stock #: BBP-4-240US

Description: Show your patriotism with this American flag. This flag measures 6" x 9", is double sided, made of heavy duty polyester, fits 3/8" pole, and comes with an O-ring.

Stock #: BBP-41-153

Description: These unique Saddlebag Scuff Pads will protect your saddlebags from unintentional passenger scuffs with a soft carbon fiber look. The embedded carbon fiber pattern is covered in a soft resin gloss to not only look good, but to be functional.Comes as set of 4 for the Can Am Spyder RT. Pads measure 6 ½” x 3 ½” at the widest. Special adhesive backing provides durable adhesion in all elements.

SADDLEBAG SCUFF PADS, Carbon Fiber Look, With 3M Adhesive Backing, For Can-Am RT

Stock #: BBP-52-532

Description: These decorative tapered chrome steel accent strips give the feel of winged flight. These accents are 8-3/4" long and can be used as fairing, fender or side cover accents on touring and cruiser motorcycles, trikes and trailers. Attaches with double sided tape provided.
CRUIS WING, 220 Accent Grilles, Fits Gold Wing, Cruisers, etc.

Stock #: BBP-4-231R-4

Description: Chrome Star Washers are used to protect the finish of your bike from cracks and chips emanating from accessory mounting holes. These 1” EDPM rubber washers are put between the chrome washers and your bike to add more protection to the finish of your bike while helping minimize cracking and stress cracks from drilled mounting holes. Available in either a 4PK or 10PK kit. The rubber washers are also available separately as a 10PK, to use on existing installations.
STAR WASHER 4PK CHROME, With Rubber Washer, 1/4" Hole - 4PK

Stock #: BBP-4-231R

Description: Chrome Star Washers are used to protect the finish of your bike from cracks and chips emanating from accessory mounting holes. These 1” EDPM rubber washers are put between the chrome washers and your bike to add more protection to the finish of your bike while helping minimize cracking and stress cracks from drilled mounting holes. Available in either a 4PK or 10PK kit. The rubber washers are also available separately as a 10PK, to use on existing installations.
CHROME STAR WASHERS, With Rubber Washer, 1/4" Hole - 10PK

Stock #: BBP-W41260602R

Description: Chrome Star Washers are used to protect the finish of your bike from cracks and chips emanating from accessory mounting holes. Big Bike Parts® now includes 1” EDPM rubber washers to put between the chrome washers and your bike, these rubber washers add more protection to the finish of your bike while helping minimize cracking and stress cracks from drilled mounting holes. Available in either a 4PK or 10PK kit. The rubber washers are also available separately as a 10PK, to use on existing installations.
26MM OD X 6MM ID X 2MM, Rubber EPDM Washer, 10 Pack

Stock #: See below

Description: The Virtually Indestructible Ultimate Brake Light Strobe/Flasher That Does It All!

Over Current Protection, Thermal Protection, Short Circuit Protection, Reverse Wiring Protection, 84 Watts Max Power Rating, 12VDC, Works with LEDs or Incandescent Bulbs,
Sealed, Weather Tight Case, Compact Size: 2.25" x 1.25" x 0.5", 5 Year Warranty. Although this device has been designed to significantly increase your braking visibility, flash/strobe patterns may not be street legal. Many user selectable Flash/Strobe Patterns are available, fitting many motorcycle makes/models. Call for details and stock numbers.

Stock #: ST5

Description: Fits: 2008-2014 RS, RS-S, 2013-2014 ST

2 Stingerz 9 LED (27 LEDs)
9 Stingerz 12 LED (108 LEDs)
3 Stingerz 24 LED (96 LEDs)
7 Stingerz 30 LED (210 LEDs)
2 Stingerz 69 LED (138 LEDs)
1 Stingerz 99 LEDs (99 LEDs)

Complete LeverLockz™ Installation Kit With Photos showing Exact Placement of Each Strip. 678 LEDs in Total (Less than 3 amps current draw)

Stock #: TMWZ02

Description: Fits: All Can-Am Spyder Models
Includes:
8 Color Changing Standard Magical Wizard™ Pods
Color Command™ Remote Control 4 Module with TruMAGIC™
2 Individual Key Fobs
LeverLockz™ Installation Kit with Instructions

Stock #: FOOTREST-ADJ

Description: Fits: 2008-2012 RS, 2008-2012 RS-S

The fully Adjustable Footrest Bracket Kit comes with easy to adjust peg mounting brackets in a 2", 3" or 4" length. They are made from a ¼ steel plate, have a black powder coat finish. Requires the Spyder Foot Peg Clevis Kit PN 8061 (except when using item spy-billet-pegs-5-hwy).

Stock #: See below

Description: Fits: 2008-2012 RS, 2008-2012 RS-S

These kits install quickly to give a more comfortable and enjoyable ride. They allow you to retain the stock upper console containing the Limited Edition badge, are made from T6061 billet aluminum and contain all stainless steel hardware.

The 4 inch height allows the use of the existing stock cable, hoses, and wiring without any modifications or lengthening . The 3 inch kit gives you less desired rise or used with a BRP 1 inch factory riser kit. The 4 inch kit cannot be used with the 1 inch BRP factory riser kit. Billet bolt caps, can be added to the upper bar bolts, giving your riser kit a matching custom look. Does not fit with a Corbin Fairing.

Available in Aluminum or Black Anodize finish.

Spyder 4 inch Billet Riser Kit-Manual Shift
Stock #: Spy Riser 4 Man

Spyder 4 inch Billet Riser Kit-Electronic Shift
Stock #: Spy Riser 4 Elec

Billet Bolt Caps (pair, not needed for Easy Risers)
Stock #: Spy Riser Bolt Caps

Stock #: Spyder-filler

Description: Fits: 2008-2012 RS, 2008-2012 RS-S
These emblems fill in those blank recesses on the handlebars. Available in Black for SM5's and SE5's.

Stock #: See below

Description: These emblems replace the BRP logos on the nose and tail of your Spyder to give it a custom look. Available in Black on Silver or Silver on Black.

Stock # Spyder-Emb fits:
2008-2014 RS, RS-S, ST, ST-S, ST-Limited.
Stock # Spyder-Emb-RT fits:
2010-2014 RT, RT-S, RT Limited

Stock #: SPY-FRONT-RUN-AW

Description: Fits: 2008-2012 RS, 2008-2012 RS-S, 2010-2012 RT

This is a low profile, dual-color operational light that mounts to the nose on your Can Am Spyder. The flexible LED strips are 100% waterproof and come with a lifetime warranty against LED failure. It operates as a white forward facing DRL and amber forward facing turn signals. When a turn signal is activated, the white DRL will turn off and the amber LED will turn on and flash. When the turn signal is complete the Amber will turn off and the White turns back on.

An Amber/White Turn Signal Harness allows Dual the Front Runners to be plug and play. Only one harness is needed per bike.
Harness Stock # SPY-TS-HARN fits 2008-2012 RS, 2008-2012 RS-S, 2010-2012 RT

Stock #: SPY-TS-HARN

Description: Fits: 2008-2012 RS, 2008-2012 RS-S

Only 1 Needed Per Bike. Allows Dual Color LED Front Runners and Dual Color LED Day Runners to be plug and play.

Stock #: SPY-RT-SCUFF-G

Description: Fits: 2010-2012 RT, RT-S, 2013 RT-Limited

Add some style to your Spyder RT while keeping your outer air wings free of scuff and marks. Made from Aircraft Grade T6061 Billet Aluminum. Hard Coat Anodized in Satin Black with natural color machined highlights. Easy installation.

Stock #: See below

Description: Fits: 2008-2014 RS, RS-S

The stylish standard billet foot pegs measure 5 1/4" in length, or 4 1/4" inches for use with Corbin saddle bags. Made from aircraft grade T6061 billet aluminum and finished with a “hard coat” anodized treatment. Applications for driver, passenger, and Custom Dynamics Highway Bracket positions are available in both clear & black anodized finishes. Each peg is engraved with a 3D Spider in its web. Made for use with the Custom Dynamics® foot peg adapters (sold separately), and works with many other aftermarket adapters.

5 1/4" Spyder Billet Foot Pegs (For use with Highway Bracket)
- Available in Black
- No adapter needed when used with highway foot rest (Item: Footrest-adj)
Stock #: spy-billet-pegs-5-hwy

5 1/4" Spyder Billet Foot Pegs (Driver or Passenger)
- Available in Clear Aluminum or Black
-Must use Spyder Foot Peg Front and Rear Adapters
- Not for use for passenger pegs with Corbin Saddle Bags
Stock #: spy-billet-pegs-5

4 1/4" Spyder Billet Foot Pegs (Passenger)
- Available in Clear Aluminum or Black
-Must use Spyder Foot Peg Front and Rear Adapters
- For passenger pegs with Corbin Saddle Bags
Stock #: spy-billet-pegs-4

Stock #: SPY-BILLET-MCC

Description: Fits: 2008-2012 RS, RS-S

Easily covers your stock master cylinder cap while adding some style. Made of T6061 Aircraft Grade Billet Aluminum with a Hard Coat Anodized finish for long lasting beauty and durable service. Each is engraved with a spider and web design.

Stock #: SPY-ERISER

Description: Fits: 2008-2012 RS, RS-S

The new 4.5 inch (114mm) kit is fully adjustable forward or back for a more comfortable ride. The 4.5 inch height allows use of the existing stock cable, hoses, and wiring without any modifications. Available in Silver or Black Powder Coat Finish and are made from die cast aluminum. Cannot be used with the 1 inch BRP factory riser kit or a Corbin Fairing.

Stock #: See below

Description: Fits: 2008-2014 RS, RS-S

Comes in both a standard and extended length version to help locating the parking brake with your heal. Both designs will feature anti-slip nubs to assure a positive grip every time. Made from Billet T6061 Aircraft Grade Aluminum and Hard Coat Anodized to give lasting beauty & durable service. Measure the length of your parking brake pedal pad to find out if you have the early parking brake arm (3.25 inches) or the later current design (2.25 inches).

Stock # SPY-BILLET-BC fits All Main Brake Pedals & Parking Brakes Measuring 2.25" (Standard). Available in Black and Clear-Standard

Stock # SPY-BILLET-BC325 fits All Main Brake Brakes & Parking Brakes Measuring 2.25" or 3.25" (Extended Version). Available in Black

Stock #: SPY-DAYRUN-PUCK

Description: Fits: 2008-2014 RS, 2008-2014 RS-S, 2013-2014 ST, 2013-2014 ST-S, 2013-2014 ST-Limited

These very bright LED powered driving lights add a remarkable amount of additional day & night time illumination, further increasing your overall safety. There is sleek design and mounting, with a tough black aluminum anodized housing that is a perfect match for your Can Am Spyder. They are 100% plug and play and come with all connectors and a waterproof switch so that you can turn Day Runner Pucks on or off as you desire. Installation is easy without any special skills or tools.

Stock #: See below

Description: Radiator Inlet Covers fit: 2008-2013 RS, RS-S, ST, ST-S, ST-Limited
RT Radiator Inlet Covers fit: 2010-2012 RT, RT-S, RT-Limited

Aluminum with Black powder coat Finish. Some include 3M Primer and Tape.

Stock # SPY-VENT-COFFIN: Coffin Inlet Cover
Stock # SPY-VENT-FLAME: Flame Inlet Cover
Stock # SPY-VENT-WEB: Web Inlet Cover
Stock # SPY-VENT-CWEB: Coffin Web Inlet Cover

Stock # SPY-RTVENT-UCOFFIN: Coffin Inlet Cover Upper
Stock # SPY-RTVENT-LCOFFIN: Coffin Inlet Cover Lower
Stock # SPY-RTVENT-UWEB: Web Inlet Cover Upper
Stock # SPY-RTVENT-LWEB: WEB Inlet Cover Lower

Stock #: SPY-BILLET-SPC

Description: Fits: 2008-2014 RS, RS-S

This new cover is made from Billet T6061 Aircraft Grade Aluminum and then Hard Coat Anodized for long lasting beauty and durable service. With an embedded Custom Dynamics® Spyder design, these are a must to match our highway pegs, driver & passenger pegs, brake pedal covers and master cylinder cover.

Stock #: See below

Description: Almost Invisible When Off
Extremely Visible When On

These super bright LED powered DRLs add a remarkable amount of additional night time illumination, further increasing your overall safety. There is sleek design and mounting, with a tough black aluminum anodized housing for years of trouble free service and good looks. When combined with the Custom Dynamics Spyder TIPS Kit, they also function as additional front turn signals. Installation is easy without any special skills or tools, and they are available in either Cool White or Autumn Amber.

Stock # SPY-DAY-RUN fits: 2008-2014 RS, 2008-2014 RS-S, 2013-2014 ST, 2013-2014 ST-S, 2013-2014 ST-Limited.
Stock # SPY-DAY-RUN-RT fits: 2010-2013 RT, RT-S, RT-Limited.

Stock #: SPY-CMBB-B

Description: Fits: All Can-Am Spyders
Cusom Dynamic's Brightest LED Driving Light
- Aircraft Grade T6061 Billet Aluminum
- Black Anodized Finish
- 3 Super Flux 2 Watt Cree LEDs
- Cool White HID Color 6000K
- Low Current Draw
- Lifetime Warranty Against LED Failure
- 30 Degree Pattern
- Double O Ring Design
- Stainless Steel Mounting Hardware
- 3.125" Long x 2.25" Diameter
- 3/8 - 16 Mounting Stud
- Plug and Play Wiring Harness with Waterproof Push Button on/off Switch
(comparable to 50 watt halogen bulbs)

Stock #: Spy-Mirror-Ext

Description: Fits: 2008-2014 RS, 2008-2014 RS-S

These extensions move the mirrors out and up, allowing for a far greater view: up nearly 1.5 inches and out just over 2.5 inches. They are made of billet T6061 Aircraft grade aluminum and feature the latest 3D CNC machining and design techniques to produce a one piece core block with a smooth body blending design. They incorporate 3 locking tabs in the base to hold the unit firmly in place, eliminating the need to tighten the mirror's bolts to the point of breaking. (Does not fit with BRP Touring Windshield without modification to windshield.)

Stock #: SPY-MF-CHANNELZ

Description: Fits: 2008-2014 RS, 2008-2012 RS-S, 2012-2014 RT, 2010-2012 RT-S, 2013-2014 ST

Here we have low profile, dual color operational light that mounts to the center channel on your Can Am Spyder front fenders. It uses more LEDs and superior LEDs, and the flexible LED strips are 100% waterproof and come with a lifetime warranty against LED failure. They can operate as running lights or when combined with TIPZ units function as both running and turn signals. The LEDs transition from Amber to Red at the top of the fender so you have forward facing Amber LEDs, and rear facing Red LEDs. MagicFLEX® Channelz use more LEDs and superior LEDs.

Stock #: See below

Description: Fits: 2008-2014 RS Models, 2008-2014 RS-S Models, 2013-2014 ST, 2013-2014 ST-S

These replace the non-functioning side marker reflector on your RS/ST series Spyder (the bag inlay area) with a full function LED running light, and can be installed in just minutes without any special skills or tools. They feature 12 Super Bright Genesis Series LEDs. You increase your chances of being seen, and decrease you chances of being hit broadside. Available as Running Light or Dual Intensity Running/Turn.

Stock #: SPY-RS-BRIGHTSIDE-R (Running)
Stock #: SPY-RS-BRIGHTSIDE-R-D (Dual Brightsides - Running/Turn)

Stock #: See below

Description: Fits: 2010-2014 RT, RT-S, RT-Limited

These replace the non-functioning side marker reflector on your 2010-2013 RT series Spyder (the bag inlay area) with a full function LED running light, and can be installed in just minutes without any special skills or tools. They feature 12 Super Bright Genesis Series LEDs. You increase your chances of being seen, and decrease you chances of being hit broadside. Available as Running Light or Dual Intensity Running/Turn.

Stock #: SPY-BRIGHTSIDE-R (Running)
Stock #: SPY-BRIGHTSIDE-R-D (Dual Brightsides - Running/Turn)

Stock #: SPY-BRIGHTSIDE-A

Description: Fits: 2008-2013 RS Models, 2008-2013 RS-S Models
These replace the non-functioning side marker reflectors on your Spyder with a full function LED running light, and can be installed in just minutes without any special skills or tools. They feature 12 Super Bright Genesis Series LEDs. You increase your chances of being seen, and decrease you chances of being hit broadside. Combine BRIGHTSIDES with the Custom Dynamics Fender TIPS Kit for BRIGHTSIDES to become a turn signal as well as running light as well.

Stock #: SPY-GIVI-LED-KIT

Description: Fits: 2008-2013 RS Models, 2008-2013 RS-S Models

It convert the plain red reflectors in your GIVI V35 saddle bags into Genesis LED lights. The kit will allow you either to add these as additional turn signals or allow you to eliminate the stock turn signal stalks and use the Genesis LED GIVI Saddle Bag Lights as your main turn signals in order to completely clean-up the look of your bike. Comes with a universal harness.

Each light features 30 Genesis® Series Super Bright LEDs for unmatched power and performance. Simple instructions assure an easy installation. Easy to use weather-proof quick disconnects ensure quick and easy removal the bags from your bike. To function as run/brake/turn you must use our Spyder SMART Triple Play.

Stock #: SPY-TIP-RT

Description: Fits: 2013-2014 ST, 2013-2014 RS, 2011-2012 RS-S, 2010-2014 RT, 2010-2012 RT-S , 2010-2012 RT-Limited Models

The Custom Dynamics® Spyder RT Front Fender TIPS Kits are now available! They will convert the front fender tip marker light on your Spyder RT into both a running light, and full function turn signal. Comes complete with step by step instructions, and everything needed for a quick, convenient, safe and secure trouble free installation.

Stock #: SPY-TIP

Description: Fits: 2008-2012 RS Models

It's a fender tip to increase the safety and visibility of your new Spyder. Custom Dynamics Front Fender Tips kit will convert the front fender tip lights from the stock running lights only, to dual-function running/turn-signal lights.

This kit uses the stock-style plugs and the easy to use Posi-Tap connectors for a simple, quick, clean and carefree installation. Add a Super Bright 4 LED Bulb in Amber or White. Add a Super Bright 4 LED Bulb in Amber or White.

Stock #: SPY-FMFL

Description: Fits: 2008-2014 RS, 2008-2012 RS-S, 2010-2014 RT, 2013-2014 ST

Replace your stock non-illuminating front mud flap reflectors with these super-bright Custom Dynamics® LEDs. This kit features everything needed to upgrade both sides with replacement LED lights that function as additional rear running lights.

When installed in conjunction with our Fender TIPS Kit (sold separately), they also function as turn-signals. They install quickly & easily, allowing you to upgrade your Spyder with minimum effort. Each light features 28 Custom Dynamics® LEDs.

Stock #: MBL-Spy-FrWhDcl

Description: Fits all Years and Models of Spyders.
Two Piece Front Wheel Center Cap Accent Decal Set. Vinyl and UV Protected. Dress Up Your Wheels!

Stock #: See below

Description: Fits: 2010-2014 RT, RT-S, RT-Limited Models

The LED RT High Mount Brake Light unit features 36 Genesis Series LEDs for unmatched brightness and comes in a contoured chrome housing to match your trunk. Filling in the "void" area along the trunks top edge, this is the light that you should have had there in the first place. It's "high mount" design is much more noticeable for drivers behind you just like the third brake light in a car's rear window.

Versatile design can be used as third brake light, additional running light, or Dual Intensity (running/brake) with optional Dual Converter Unit.

Stock #: SPY-TAIL-LT

Description: Fits: 2008-2014 RS, RS-S, ST, ST-S, ST-Limited Models

Fill in the dead pocket on your Spyder’s tail section with this super bright Custom Dynamics® Genesis® LED Taillight. This sleekly designed light follows the contours of your tail section and, once installed, looks “factory” in both fit and finish. It installs easily with “plug and play” connections requiring no cutting or splicing of your Spyder’s wiring harness.

The taillight features 68 Genesis® Series LEDs to increase visibility and add style to your Spyder. This taillight functions as both a running and brake light, and can also be used with our new and improved Triple Play™II unit (sold separately) for even more safety and visibility.

Note: Does not work with BRP Sport Rack

Stock #: SPY-TAIL-CON

Description: Fits: 2008-2014 RS, RS-S, ST, ST-S, ST-Limited Models
Genesis LED tail lights in new stock Spyder tail light housings. 24 super bright dual intensity Genesis LEDs per side in a brand new OEM housing.

Optional Metric/Universal GEN2 Magic Brake Light Flashers are available.

Stock #: Spy-Smart-TPU

Description: Fits: 2008-2014 RS Models, 2008-2014 RS-S Models, 2013-2014 ST, 2013-2014 ST-S, 2013-2014 ST-Limited

The SMART Triple Play® kit for the Can-Am Spyder converts your rear turn signals and/or Taillights to Super-Bright, Red, Genesis® LEDs, and allows them to function as additional running and brake lights as well.

Features of the New SMART Spyder Triple Play®:
- Converts Rear Turn Signals to Run-Brake-Turn (LEDs included)
- Option to Also Convert Rear Taillights to Run-Brake-Turn

-Recommendation: Convert Rear Taillights to LEDS, PN SPY-TAIL-CON, otherwise turn signals will flash fast when brake and turn signals are both on together, this will not put bike into Limp Mode
- 100% Plug and Play Module
- Adjustable Running Light Brightness
- User Selectable Brake Flash/Strobe Patterns (or no flash at all)
- 5 Year Warranty on Module
- LEDs Included
- Lifetime Warranty on LEDs
- Load Equalizer Included

Stock #: Spy-LED-Rear-Turn

Description: Spyder LED Rear Turn Signals
Fits: 2008-2014 RS, RS-S, ST, ST-S, ST-Limited Models

The LED Rear Turn Signal Kit converts your rear turn signals to Super-Bright, Genesis® LEDs — either RED or AMBER. Increase your visibility and communication with other motorists. Load Equalizer Included. Available in either Red or Amber.

Lifetime Warranty Against LED Failure

Stock #: See below

Description: Spyder LED Front Turn Signals
Fits: 2008-2014 RS and RS-S Models

Custom Dynamics® front turn signal pods replace the stock incandescent turn-signals with super-bright, amber Genesis® LED’s.

Option: Increase your communication with other motorists: use Double Play to convert your single intensity LEDs to dual intensity LEDs to allow them to function as running and turn signals. Safety and visibility are greatly increased. The unit installs easily and makes your front turn-signals operate as running lights, while still retaining their turn signal function.

For use with Custom Dynamics® Spyder LED front turn-signal pods only.

Lifetime Warranty Against LED Failure

Item: Spy-LED-Front-Turn - Single intensity (Turn Only),
Item : Spy-Double-Play - Double Play to convert to Dual Intensity (Running & Turn)

Stock #: See below

Description: A two piece saddle replaces the OEM single piece seat. The concave seating surface conforms to the shape of your body, eliminates pressure points and spreads body weight over a greater area, increasing comfort and reducing rider fatigue. The design allows access to the fuel filler without unlatching the seat, and allows the rear saddle to be swapped out with our Smuggler Trunk. Saddles use a high-density Comfort Cell foam and have an electric heat option. There are many styles and colors, including genuine leather, to choose from. Installation is simple, with all required brackets included.

Optional backrests also install easily and tailor to your riding posture effectively. Use a single backrest to transfer from front to rear as needed, or order two backrests for full time use. A variety styles are available to suit your taste.

Available in a Lamonster Cut (SpyderLovers.com)

Stock #CA-S-2: Front Saddle no heater, 2008-2013 Spyder RS / ST
Stock #CA-S-2-LM: Front Saddle no heat, 2008-2013 Spyder LAMONSTER Cut
Stock #CA-S-2-E: Front Saddle w/ Heat, 2008-2013Can-Am Spyder RS / ST
Stock #CA-S-2-LM-E: Front w/ Heat, 2008-2013Spyder LAMONSTER Cut
Stock #CA-R: Rear Saddle no Heater, 2008-2013 Spyder RS / ST
Stock #CA-R-LM: Rear Saddle no Heat, 2008-2013 Spyder RS / ST LAMONSTER Cut
Stock #CA-R-E: Rear Saddle w/ Heat, 2008-2013 Spyder RS / ST
Stock #CA-R-LM-E: Rear Saddle w/ Heat, 2008-2013 Spyder LAMONSTER Cut
Stock #297-SB: Standard Leather Backrest (ea)

Stock #: See below

Description: The Dual Touring Saddle has wide, sculpted seating positions to create a larger area of contact for excellent weight distribution. A door built into the nose of the saddle for fueling provides much easier access and allows your passenger or dufflebag to stay in place on the bike. An electric seat heater option is available. An optional rider's backrest for added comfort and support, and the Corbin saddle works with a variety of backrest models.

Generously sized Trunk Armrests give your passenger a usable area to rest their elbows, while the design of the Trunkrest allows the passenger to have a very relaxed and supportive ride. A cup holder molded specially for the Corbin armrests is available. The saddle has simple installation, while the armrest installation does take some time. All are constructed of high quality materials, and add up to a very relaxed posture and comfortable ride.

Available in a Lamonster Cut (SpyderLovers.com)

Stock #CA-RT-10:
Dual Tour saddle, no heat, 2010-2014 Can-Am Spyder RT
Stock #CA-RT-10-LM:
Dual Tour no heat, 2010-2014 Can-Am Spyder RT LAMONSTER Cut
Stock #CA-RT-10-E:
Dual Tour saddle w/ HEAT 2010-2014 Can-Am Spyder RT
Stock #CA-RT-10-LM-E:
Dual Tour w/ HEAT 2010-2014 Can-Am Spyder RT LAMONSTER Cut
Stock #CA-RT-10-TR:
Trunkrest for 2010-2014 Can-Am Spyder RT
Stock #CA-RT-10-ARM:
Trunk Armrests for 2010-2014 Can-Am Spyder RT
Stock #CA-RT-CH:
Cup holder for Corbin Armrests / Can-Am Spyder RT
Stock #02-T: Large Tee model Ovalbac backrest
Stock #02-SB: Ovalbac Leather Backrest (ea)

Stock #: #CA-RFEN

Description: Gives a nice clean look for the rear of your Spyder, and fits in conjunction with Corbin's Fleetliner saddlebags or on bikes without saddlebags. It is constructed of durable Fibertech material and RTM molded for a precision shape and perfect finish. A chromed license plate frame, with integrated LED lighting included, allows the plate to integrate into the fender shape nicely. The fender comes prepainted to coordinate with factory paint. Simple installation.

Stock #CA-RFEN: Rear Fender, Painted, 2008-2012 Can-Am Spyder RS

Stock #: See below

Description: Considerably larger than the average set of saddlebags, and manufactured of Fibertech™ material for durability and a clean finish. They come pre-painted to match factory paint, and are available in solid color or two-toned with black accent panels. Fully lined on the inside to protect your cargo and locking doors keep contents secure. For loading, the doors are on top of the bags and they open forward into the wind and are fully weather stripped to keep the rain. Fleetliner bags work with your stock turn signals and passenger foot pegs. Installation is not difficult, but it is involved and fairly time consuming.

Stock #CA-BAG-ST-B:
Fleetliner bags single color, Can-Am Spyder ST’s
Stock #CA-BAG-ST-T:
Fleetliner bags two-tone, Can-Am Spyder ST’s

Stock #: See below

Description: Corbin's trunkbox is large enough for a single full face helmet and visually blends well with the bike. It installs easily with all required brackets included and works with your stock or Corbin seat system. The material is extremely resistant to vibration. It provides good passenger back support and is covered in genuine leather for an excellent feel.

It comes fully lined on the inside and painted to match your OEM paint scheme in either solid colors or two-tone. They match the paint in Black, Red, Yellow or Silver. The door is fully weather stripped and is lockable.

It includes custom lighting unit that operates as a tail AND brake light that easily connects, consumes very little power and provides a lot of additional visibility. It is easily repaired &/or repainted if ever damaged. It does not work with the Can-Am saddlebag kit.

Stock #CA-1H-BOX: Trunkbox, single helmet, painted One color 2008-2013 Can-Am Spyder RS / ST
Stock #CA-1H-BOX-T: Trunkbox, single helmet, painted Two-Tone 2008-2013 Can-Am Spyder RS / ST

Stock #: #CA-SMUG

Description: The Smuggler, part of Corbin's modular seating system, is a two piece saddle system that allows you to switch from solo to dual easily using a built in key lock system. Locking onto your bike in place of the passenger seat, it comes prepainted to your stock paint and gives a secure area to stow essentials. The front saddle mounts using included brackets, and the Smuggler trunk and/or rear seat mount to this bracket securely with integrated Corbin lock system. It gives excellent support for longer range and greatly reduces rider fatigue. The Smuggler has a generous capacity that measuring 12" x 15" x 2.25", and comes fully lined to help protect your cargo and cushion some road noise. The door opening is fully weather stripped and lockable.

Stock #CA-SMUG: Smuggler Trunk, painted, 2008-2013 Can-Am Spyder RS/ST

Stock #: See below

Description: Larger than the average set... just over 50 liters per side to be exact. Manufactured of Fibertech™ material for durability and a clean finish. They come prepainted to match factory paint, and are available in solid color or two-toned with black accent panels. Fully lined on the inside to protect your cargo and locking doors keep contents secure. For loading, the doors are on top of the bags and they open forward into the wind and are fully weather stripped to keep the rain. Fleetliner bags work with your stock turn signals and passenger footpegs. Installation is not difficult, but it is involved and fairly time consuming.

Stock #CA-BAG-B: Fleetliner bags single color, Can-Am Spyder RS
Stock #CA-BAG-T: Fleetliner bags two-tone, Can-Am Spyder RS

Stock #: See below

Description: Designed specially to bolt up to the Corbin Armrests available for the Spyder RT models. Mounts directly to hardware inside the right armrest for a very simple, clean installation with no visible brackets. Designed to carry a wide range of cup sizes.

Diameter: Tapers from 3.25" at top to 3.125" at bottom. Depth: 3.5"

Constructed of durable and weather resistant ABS using a leather texture material that blends visually with the Corbin seat components. Fits nicely to the armrest for a clean profile and is angled out to allow boarding the RT from either side.

Stock #CA-RT-CH:
Cup holder for Corbin Armrests / Can-Am Spyder RT
Stock #CA-RT-10-ARM:
Trunk Armrests for 2010-2014 Can-Am Spyder RT

Stock #: See below

Description: This accessory gives a great appearance while providing better wind protection. The fairing is closer to the rider to get you into the slipstream. Having a much larger profile creates a larger area of protection. This gives a smoother, quieter ride that is more comfortable.

It comes pre-painted to coordinate with factory colors and includes all required brackets so it's ready for immediate and simple installation. It comes with a six inch smoke windscreen that gives the best combination of nice visuals and general purpose wind protection. Alternately there’s a ten inch clear windscreen that gives a higher area of protection.

Stock #CA-FAIR: Fleetliner Fairing, Painted solid color, Can-Am Spyder RS
Stock #CA-FAIR-T: Fleetliner Fairing, Painted two-tone with Gloss Black accent, Can-Am Spyder RS

Stock #: MBL-SpyRT-HdlAcc

Description: This three piece Handlebar Accent Kit fills in the empty spaces on your RT handlebars. UV protected vinyl decals fill in the void and dress up your Spyder. Easy installation. Dress up your RT Handlebars!

Stock #: MBL-SpyRS-HlmtLoc

Description: The MBL Cruiser Lock allows you to lock your helmet to the bike at the handlebar area.
The MBL Cruiser Lock is installed on the left side handlebar clamp. Once installed, the lock provides a simple way to lock your helmet to your Can-Am Spyder. The stud will replace one (1) of the two screws in the handlebar clamp. To lock your helmet, you place the padlock shackle through the opening on the lock stud and your helmet "d ring" and lock..
Contains one Master Lock, two keys, one MBL Cruiser Lock stud made out of 303 stainless steel, and a washer.

Stock #: MBL-SpyRT-SRrFend

Description: Fits 2010 - 2013
Give your Can-Am Spyder RT a sportier look and show off that rear tire with this new hand laid fiberglass RT Sport Fender. It is reinforced on the inside with carbon fiber and has a paint-able black gel coat finish. This is the rear fender that the Can-Am Spyder RT should have had from the factory. Some fitting and prep work will be required for a proper installation prior to painting. Buyer assumes responsibility for correct installation. Professional installation is recommended but not required. License plate frame sold separately (not included). Please allow 10-14 days for shipping as these are manufactured as ordered. Test ridden all over the country and no issues with debris being slung up over the back & rider felt less of a wind tunnel affect.

Stock #: KMP-196902

Description: ELKA SUSPENSION SHOCK ABSORBERS FOR CAN-AM SPYDER
Features:
Tuning specifically optimized for the Spyder.
Spring setup and rate according to your personal weight.
Durable and completely serviceable.
Wide range of effective adjustment.
Offered with steel or aluminum body.

Benefits:
Reduced body roll and front-end wandering.
Improved handling and better stability.
More precise direction.
Consistent damping and predictable handling.
Increased performance and comfort.

ELKA’s exclusive added value:
Customized upgrade tailored to your specific needs and budget.
High-quality performance products crafted from the finest materials.
Hand-assembled to the tightest tolerances by qualified technicians.
One of the fastest turnaround times in the industry for custom-built shocks.
Personalized service directly from the manufacturer.
Products backed by the most extensive after-sales support of the industry.
Call for more info.

2008-2012 Spyder RS
Applies to Rear, Sold as Unit, Stock# KMP-196902

2010-2012 Spyder RT/RT-S
Applies to Front, Stage 1, Sold as Pair, Stock# KMP-196901

2010-2012 Spyder RT/RT-S
Applies to Front, Stage 1+R, Sold as Pair, Stock# KMP-196900

2013 Spyder RT/RT-S
Applies to Front, Sold as Pair, Stock# KMP-020475

2013 Spyder RT/RT-S
Applies to Rear, Sold as Pair, Stock# KMP-020476

Stock #: See below

Description: Made of 7071 Billet Aluminum
Available in flat back or aluminum.
Hardware included.
Easy installation.
2 x FloorBoards
Aluminum stock number: ITL-400-08182A
Black stock number: ITL-400-08182B
Fits: 2008-2014 Can-AM BRP Spyder RS

Stock #: See below

Description: 80 degree pivot adjustment
Made of 7071 Billet Aluminum
Available in flat back or aluminum.
Hardware included.
Easy installation.
2 x Support Brackets, 2 x Adjustable Highway Footpegs and Hardware
Aluminum stock number: ITL-400-08304A
Black stock number: ITL-400-08304B
Fits: 2008-2014 Can-AM BRP Spyder RT

Stock #: See below

Description: FLOORBOARDS SOLD SEPERATELY
Made of 7071 Billet Aluminum
Available in flat back or aluminum.
Hardware included.
Easy installation.
2 x Support Brackets, 2 x Adjustable Highway Footpegs and Hardware
Aluminum stock number: ITL-400-08264A
Black stock number: ITL-400-08264B
Fits: 2010-2014 Can-AM BRP Spyder RT

Stock #: See below

Description: FLOORBOARDS SOLD SEPERATELY
Made of 7071 Billet Aluminum
Available in flat black or aluminum.
Hardware included.
Easy installation.
2 x Support Brackets, 2 x Adjustable Highway Footpegs and Hardware
Aluminum stock number: ITL-400-08180A
Flat Black stock number: ITL-400-08180B
Fits: 2008-2014 Can-AM BRP Spyder RS.

Stock #: ITL-400-08302A

Description: DRIVER HIGHWAY PEG KITS RS 08-14
(FLOORBOARDS SOLD SEPARATELY)
80 degree pivot adjustment
Made of 7071 Billet Aluminum
Available in flat black or aluminum.
Hardware included.
Easy installation.
2 x Support Brackets, 2 x Adjustable Highway Footpegs and Hardware
Aluminum stock number: ITL-400-08302A
Flat Black stock number: ITL-400-08302B
Fits: 2008-2014 Can-AM BRP Spyder RS.

Stock #: See below

Description: BRP SPYDER RS 08-14 PASSENGER FLOORBOARD KITS
80 degree pivot adjustment
Made of 7071 Billet Aluminum
Available in flat black or aluminum.
Hardware included.
Easy installation.
2 x Adjustable Replacement Footpegs, 2 x Floorboards
Aluminum stock number: ITL-400-08175A
Flat Black stock number: ITL-400-08175B
Fits: 2008-2014 Can-AM BRP Spyder RS.

Stock #: See below

Description: RS 08-14 DRIVER FLOORBOARD KIT
80 degree pivot adjustment
Made of 7071 Billet Aluminum
Available in flat black or aluminum.
Hardware included.
Easy installation.
2 x Adjustable Replacement Footpegs, 2 x Floorboards
Manual transmission models must purchase the "Shifter Kit

Aluminum stock number: ITL-400-08174A
Flat Black stock number: ITL-400-08174B
Fits: 2008-2014 Can-AM BRP Spyder RS.

Stock #: ITL-400-08298A

Description: PASSENGER FLOORBOARD 80 DEG ALUMINUM/BLACK SPYDER RS (08-14)
* 80° pivot adjustment.
* Made of 7071 Billet Aluminum.
* Available in flat black or aluminum.
* Hardware included.
* Easy installation.
* Made in Canada.
2 x Adjustable Replacement Footpegs, 2 x Floorboards
Aluminum Stock No: ITL-400-08298A
Flat Black Stock No: ITL-400-08298B
Fits: 2008-2014 Can-AM BRP Spyder RS.

Stock #: ITL-076-D770ST

Description: Transparent, 25cm higher than the original.
Dimensions: Height - 52cm, Width - 46cm
Fits: 2008-2014 Can-AM BRP Spyder RS

Stock #: See below

Description: DRIVER FLOORBOARD 80 DEG BLACK/ALUM. SPYDER RS (08-13)

* 80° pivot adjustment.
* Made of 7071 Billet Alumimiun.
* Available in flat black or aluminium.
* Hardware included.
* Easy installation.
* Made in Canada.

2 x Adjustable Replacement Footpegs, 2 x Floorboards
Manual transmission models must purchase the "Shifter Kit"
Aluminum Stock No: ITL-400-08297A
Flat Black Stock No: ITL-400-08297B
Fits: 2008-2014 Can-AM BRP Spyder RS.

Stock #: ITL-400-08159

Description: Made from a solid 19 piece of 7075 Billet Aluminum.
1.5" Rise & 4" Back from stock.
Billet ignition relocator included.
Stock steering lock works.
No cutting of any wires.
Highly resistant black powdercoat finish.
All necessary parts for installation in kit.
Easy to install.
Fits: 2008-2012 Can-AM BRP Spyder RS

Stock #: See below

Description: COMPLETE FLOORBOARD KIT / AUTOM. SPYDER ALUM/BLACK 08-13

* AUTOMATIC TRANSMISSION
* Made of 7071 Billet Aluminium.
* Available in flat black or aluminium.
* Hardware included.
* Easy installation.
* Made in Canada.

Aluminum Stock No: ITL-400-08173A
Flat Black Stock No: ITL-400-08173B
Fits: 2008-2013 Can-AM BRP Spyder RS

Stock #: ITL-400-08187B

Description: Description: Made of 3mm thick steel.
Dimensions: 57mm x 109mm (width x length)
Fits: 2011-2014 Can-AM BRP Spyder RS/ST

Stock #: See below

Description: SHIFTER KIT RS 08-14
BRP Spyder RS 08-14/Manual Transmission
Made of 7071 Billet Aluminum
Available in flat black or aluminum.
Hardware included.
Easy installation
Aluminum stock number: ITL400-08184A
Flat Black stock number: ITL400-08184B
Note: For manual transmissions you must buy this part.

Stock #: ITL-400-001

Description: These brackets allow you to stretch your legs out for more comfort when highway cruising.
Manufactured in 1/4" steel plate.
Black powdercoat finish.
Mounting kit included.
Pegs sold seperately.
Fits: 2008-2014 Can-AM BRP Spyder RS

Stock #: ITL176-KLX770

Description: Tubular side case bracket for K33N Side only.
Fits 2008 and 2012 Can-AM BRP Spyder RS only.

Stock #: ITL011-195

Description: Features and benefits: New for 2014, a Guardian cover for the Spyder. Industry leading, full size motorcycle cover. made of heavy-duty polyester with special Color-Lok fabric treatment to prevent fading, exclusive ClimaShield Plus fabric protection built in. Heat sealed double taped seams, Moisture Guard vent system allows moisture to escape, and heat shields allow immediate use after riding. Interior liner protects windshield, sewn elastic shock cord and under-bike strap and sewn in grommets, with convenient storage bag included. Sewn in pockets allow for use of the Guirdian Cover Alarm (item 011-999)

Stock #: ITL176-K40N

Description: Pair of Monokey side cases.
40L, 10kg max load, full face, 3.8 kg case weight.

Dimensions:
Length - 410mm
Width - 290mm
Height - 580mm

For available sizes and configurations for your BRP Can-Am Spyder, go to GiVi.ca for your exact year, make model and fitment.

Stock #: See below

Description: MOUNTING HARDWARE KIT FOR GIVI HARD BAGS FOR BRP SPYDER
SPECIAL RR CAR. BRP SPYDER 2008.
* Designed to fit with the Givi and Kappa Monokey bags.
* Made in Canada.

Top Case Mounting Kit
Specific top case bracket for Givi Monokey: Stock No: ITL-076-SR999
Specific top case bracket for Givi Monolock: Stock No: ITL-076-SR999M

Stock #: ITL076-5751

Description: Italian innovation, design and manufacturing come together to help you rediscover the pleasure of quality and originality. The inspired design of the Monokey system allows you to open the case with one hand or by remote control. It has an exceptional capacity of 55 litres, allowing you to include 2 full face helmets. The case also features new, oversized two-color reflectors. Comes with the remote control and brake light kit.

For available sizes and configurations for your BRP Can-Am Spyder, go to GiVi.ca for your exact year, make model and fitment.

Stock #: See below

Description: MODEL 447 CHROME 14X5 BRP SPYDER FR.
Black Widow manufactures wheels to the same specifications as the OE one. The quality standard meets all the international quality specifications for insurance.
All Black Widow wheels produced are X ray inspected to ensure the best quality casting on the market. The wheels are heat treated to A356 T6 hardness specifications - the same as cast aluminium GM, Chrysler and other automotive wheels.
Each wheel is supplied with cap and lugs.
Meets SAE J2530 norms.

Chrome. 14x5, Stock No.: ITL-433-44701C
Black, 14x5, Stock No.: ITL-433-44701B

Stock #: ITL-400-08310

Description: *Fits RS(08-14); RT(11-14) & ST(13-14).
*Constructed of solid steel with a powder-coat, semi-gloss black finish.
*Includes side plates that once installed, will remain on the Spyder but allows an easy removal and re-installation of the hitch.
*Pre-drilled to accept a 1-7/8" or 2" ball (ball sold separately)
*There are two holes for security chains or steel cables (chain and cables sold separately)

Stock #: ITL076-PLX770

Description: Tubular side case holder for V35 Side only.
Fits 2008 and 2012 Can-AM BRP Spyder RS only.

Stock #: KUR-4037

Description: Quickly & easily chrome your stock rubber pad with this beautiful clam-shell cover.
Fits: '08-'13 Spyder RS Models Only (Right toe brake & left heel parking brake)

Stock #: KUR-4492

Description: Inject some poison! A prowling Widow & forbidding barb add a menacing effect to your ride while providing a comfortable perch for your feet.

Stock #: See below

Description: With these peg adapters you can add the unmistakable look of Küryakyn custom footrests & dramatically improve passenger comfort with a less cramped, 1" forward foot position.
KUR-8848 Rear Peg Adapter (pr)
Note: Will not work with hard saddlebags that have replacement passenger peg mounts.
KUR-8808 Front Splined Peg Adapter (pr)
Note: Splined Adapters required for SwingWing Pegs, Liberator Pegs, & Floorboards. (Floorboards not suggested for Toe Shift Models)
KUR-7939 Front Tapered Peg Adapters (pr)
Fits: All '08-'13 Can-Am Spyder RS Models Only

Stock #: KUR-1365

Description: Premier Widow Windshield Trim with Emblem (set).
Cutting-edge style is a familiar concept for all Spyder owners, so you know that adding our classy Widow Windshield Trim will say BAM! Give your Spyder complete Widow styling with the Premier Kit or add your own touch with either the Widow Windshield Emblem or Lower Windshield Edge Trim.

Fits: '08-'13 Can-Am Spyder RS Models Only

Stock #: KUR-8716

Description: For such a hot looking ride, the view from the Spyder's saddle is a little bland. Add some much needed sizzle with our new Handlebar Accents. These chrome & black inserts install easily in existing depressions for a racy vented look that matches the similar theme found every where on the bike. You'll love the high performance look & so will the admirers!
Fits: All '08-'12 Can-Am Spyder RS Models Only

Stock #: KUR-8949

Description: Morph your Spyder into a terrorizing predator & let these chrome Widows crawl over your axle caps. Simple peel-&-stick installation, these 8-legged monsters really make an impact.
Fits: All '08-'13 Can-Am Spyder models

Stock #: RVC-CA006

Description: This compact set of driving lights is designed to give maximum light right where you need it - on the road. Attached to the upper suspension arms, these lights feature 55 watt halogen bulbs in black-powder coated steel housings which are attached with black powder coated aircraft aluminum mounts, designed specifically for the Spyder. The lights offer an incredible amount of light through 2.5” x 4.5” lenses, and include switch, relay, plug and play wiring harnesses plus easy to understand instructions. Fit RS and RS-S models.
Weight 4.00 lbs

Stock #: RVC-CA017

Description: These risers bring the handlebars back toward the rider 3 ½”, reducing rider’s reach to the bars as well as back and neck strain. Height & pull back can be easily adjusted to suit the rider’s size and preferences. Easy installation, retaining all stock cables, hoses and wiring. Risers will fit both manual and automatic transmission models. CNC machined from billet aircraft aluminum, set has a black anodized finish to blend in and prevent corrosion. Included: handlebar tubes, all stainless steel hardware, matching black tube end plugs and detailed installation instructions. For 2008-2009 SE5 and SM5 models, and 2010-2012 RS models.
Weight 3.00 lbs

Stock #: RVC-CA004

Description: Stretch out and relax!
Increased comfort for Spyder riders. RIVCO's highway peg mount set gives you a chance to stretch out and relax on the highway by moving your feet 12” - 16” forward from the foot pegs. The pivoting arms bolt directly to the frame's engine mounting bolts and offer a 4” range of motion forward until touching the bodywork. Steel base plates, mandrel bent the tubular arms, TIG welded by hand for strong rigid mounting and perfect fit, then finished in satin black powder coat. They work with all RIVCO pegs (shown with RIVCO Black Anti-Vibration Pegs, Part# PEGSBK) and any others using 3/8” mounting bolts. The set bolts on easily without any modification, and fit with or without RIVCO floorboards. Fits RS and RSS Can-Am® Spyder models, 2008-12. (#RVC-PEGSBK pegs sold separately.)
Weight 12.00 lbs

Stock #: RVC-CA005-6

Description: For use with RIVCO CA005 or CA125 passenger floorboards. As Can-Am accessories, these custom billet relocation arms will move the passenger floorboards forward 7” and have three different height adjustments, greatly increasing passenger leg room and comfort. The set is silver powder coated.
NOTE: 7" arms are recommended for use only when used with RIVCO CA020 driver floorboards.
Weight 3.00 lbs

Stock #: RVCCA005-5

Description: For use with RIVCO CA005 or CA125 passenger floorboards. As Can-Am accessories, these custom silver powder coated aircraft aluminum, CNC machined billet relocation arms will move the passenger floorboards forward 5” and have three different height adjustments, greatly increasing passenger leg room and comfort.
Weight 3.00 lbs

Stock #: RVC-CA005

Description: These Premium Billet passenger floorboards are triple chrome plated, measure 8’ x 5”, feature anti-vibration neoprene rubber inlays, and fold up when not in use. NOTE: Also available - RIVCO's optional RVC-CA0005-5, 5" Relocation Arms or RVC-CA005-6, 7" Relocation Arms for Can-Am Spyders.
Weight 6.00 lbs

Stock #: RVC-CA125

Description: These 8" x 5" passenger floorboards feature triple chrome plated Classic Steel boards with anti-vibration rubber and the set folds up when not in use. A RIVCO Products exclusive! NOTE: Can be mounted with RIVCO's optional RVC-CA0005-5, 5" Relocation Arms or RVC-CA005-6, 7" Relocation Arms for Can-Am Spyder RS/RS-S models.
Weight 6.00 lbs

Stock #: RVC-CA026-RT

Description: The heel-toe shifter for all manual shift RT models. Mounts easily to the stock shifter and works with RIVCO Can-AM Spyder RT Floorboards (RVC-CA020-WO-RT) or the stock pegs.
Also available: Floorboards for Spyder RT (RVC-CA020-WO-RT).
Weight 2.00 lbs

Stock #: RVC-CA020-26

Description: A heel-toe shifter for manual shift RS/RS-S models. Mounts to and can only be used with RIVCO Floorboards, RVC-CA020-WO. Also available: Floorboards for Spyder RS/RS-S models (RVC-CA020-WO).
Weight 2.00 lbs

Stock #: RVC-CA020-WO-RT

Description: A chrome steel driver floorboard set that features silver anodized billet aircraft aluminum mounts. This bolt-on set has full sized 12” x 5” steel floorboards with anti-vibration rubber mounted pads, and the boards mount with a forward tilt and are also 2” lower than the stock pegs, increasing leg room and comfort with a more natural riding position. Any Harley-Davidson FLH driver board will work with this mount!
NOTE: 2014 Can-Am Spyder RT models with automatic transmissions are equipped with factory driver floorboards, and RIVCO's CRVC-A020-WO-RT floorboards are not a replacement. RVC-CA020-WO-RT driver boards work with all Spyder RTs thorough 2013, and 2014 Can-Am Spyder RT models with manual transmissions.
Also available: Heel-toe shifter for manual shift models (RVC-CA026-RT). Mounts to and can only be used with RIVCO Spyder Floorboards (RVC-CA020-WO-RT).
Weight 18.00 lbs

Stock #: RVC-CA020-WO

Description: Driver Floorboard Set For The Can-Am Spyder RS/RS-S/SMS & SES - 2008 & Newer, ST Models 2012 & Earlier
A driver floorboard set that offers folding sport pegs and features aircraft aluminum and steel parts. This set has full sized 12” x 5” floorboards with rubber mounted pads and the boards’ location places your feet 4” forward and 2” lower than the stock pegs, greatly increasing leg room and comfort. Note the RVC-CA020-WO also fits 2012 and earlier ST models.
Also available: Heel-toe shifter for manual shift models (RVC-CA020-26). Mounts to and can only be used with RIVCO Spyder Floorboards (RVC-CA020-WO).
Weight 18.00 lbs

Stock #: RVC-FH400

Description: This set is designed to use existing trunk holes , doesn't interfere with opening the trunk or block brake lights, won’t ever rust or tarnish and will last a lifetime. Mounts easily, and won’t bend or flex, while remaining sturdy at highway speeds. Made in the U.S.A., this high quality dual flag holder and poles are made from stainless steel and then hand polished to a brilliant finish. The two poles are topped with chrome finials, will accommodate all flags up to 10.5” tall and include clips to keep flags in place at the top of the poles.
FLAGS SOLD SEPARATELY - RIVCO offers a variety of 6" x 9" flags. (#RVC-PFST-01 American Flag and #RVC-PFST-02 POW/MIA shown)
Weight 3.00 lbs

Stock #: RVC-CH600

Description: A leather-wrapped accessory capable of holding drink containers, beverages, cell phones, sunglasses, radios and keys. It features a separate inner insulated lining that detaches easily from the chromed steel beverage/accessory holder and chrome-plated mounting hardware. Foam inserts accommodate 12 oz. cans, 16 and 20 oz. bottles. Includes all the hardware necessary to mount on switch housings, either side, on Harleys as well as Gold Wings instead of clamping on the handlebar. Comes individually boxed with an Allen wrench for easy assembly.
Please Note: #RVC-CH600 Cup Holder requires use of #RVC-CA400 Cup Holder Mount, sold separately, to attach to the Can-Am Spyder RT.

Stock #: RVC-EH330

Description: Electric Horn Mounting Hardware Kit - Can-Am RS & RT Models, 2010-2012.
Includes all required hardware and wiring to install the loud Magnum Electric Horn Set (ELCHRN) on Can-Am RS & RT models. The kit includes relay, fuse, wiring, and mounting hardware, along with specific instructions.
Weight 2.00 lbs

Stock #: RVC-CA094

Description: These armrests are CNC machined from solid billet aluminum, hand-polished to a flawless finish and triple chrome-plated with extremely comfortable padded and water-resistant upholstered cushions. The high quality set features a pivoting design that allows easy passenger access and installation. Sturdy black powder coated steel mounting plates offer secure and rigid placement, and the armrests are rated at a 30lb. working load and have been tested to 60lb. static load. Also included is an L bracket for mounting RIVCO #RVC-CH500 Chrome and #RVC-CH600 Leather Cup Holders.
Weight 9.00 lbs

Stock #: RVC-CA400

Description: This mount for the Can-Am Spyder RT model allows the use of handy, high quality RIVCO Cup Holders #RVC-CH500 Chrome, or #RVC-CH600 Leather (which each include two insulated foam liners that can be used separately or together to fit the cup, bottle, beverage, keys or sunglasses you wish to hold). The cup holder comes off or attaches to the RVC-CA400 mount in seconds and can be locked securely. All mount parts are polished stainless steel, and the kit includes all hardware.
Please note: The RIVCO Cup Holders RVC-CH500 Chrome and RVC-CH600 Leather are each sold SEPARATELY.
Weight 1.00 lbs

Stock #: RVC-CH500

Description: An accessory capable of holding drink containers, beverages, cell phones, sunglasses, radios, and keys. It features a separate inner insulated lining that detaches easily from the chromed steel beverage/accessory holder and chrome-plated mounting hardware. Foam inserts accommodate 12 oz. cans, 16 and 20 oz. bottles. Includes all the hardware necessary to mount on switch housings, either side, on Harleys as well as Gold Wings instead of clamping on the handlebar. Comes individually boxed with an Allen wrench for easy assembly.
Please Note: #RVC-CH500 Cup Holder requires use of #RVC-CA400 Cup Holder Mount, sold separately, to attach to the Can-Am Spyder RT
Weight 2.00 lbs

Stock #: AOA46-1000

Description: This handlebar top cover is made of tri-chromed ABS and fits perfectly over the handlebars. An extremely easy piece to install, there is nothing to take apart on the bike. Fit the RT model only. A must have economical chrome accent that looks great!

Stock #: CAST-TV-310-PR

Description: FITS CAN-AM SPYDER ST STS 2013 AND UP SE5 SM5

REPLACES YOUR ORIGINAL PANELS
BUILT TO BRING IN A GREATER AIR FLOW
WILL KEEP ENGINE COOLER WHILE RUNNING

ON PRIMER READY TO PAINT

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CAST-HS-610-PR

Description: FITS CAN-AM SPYDER ST-STS 2013 AND UP SE5 SM5

FUNCTIONAL AIR INTAKES TO BRING AIR IN TO THE ENTRY VENTS UNDER THE HEADLIGHTS GIVES IT A NEW CUSTOM LOOK

ON PRIMER NOT PAINTED FOR YOUR CUSTOM COLORS

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CA-TV-300-PR

Description:
FITS CAN-AM SPYDER 2008 2009 2010 2011 2012 SE5 SM5

ON PRIMER NOT PAINTED FOR YOUR CUSTOM COLORS
THIS PANEL WAS BUILT TO BRING EXTRA COLD AIR IN THE ENGINE AREA FITS WITH THE SIDE PANEL # 200 201 203 FITS EXACTLY WERE YOU WILL REMOVE YOUR PANEL

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CA-FF-400-PR

Description: FITS CAN-AM SPYDER 2008 2009 2010 2011 2012 SE5 SM5

FITS ON STOCK BRACKETS GIVES THE SPYDER A ALL NEW LOOK
FRONT ENTRY BRAKE COOLERS REAR AIR EXIT PORTS

ON PRIMER READY TO BE PAINTED

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CART-13UP-RB-570-PR

Description: FITS CAN-AM SPYDER RT-RTS 2013 AND UP SE5 SM5

THE ULTIMATE COMFORT BOARDS MULTI POSITION>RUNNING BOARDS
INCORPORATED HIGHWAY COMFORT BOARDS
THREE ENTRY VENTS

ON PRIMER READY TO PAINT

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CART-TV-360-PR

Description: FITS CAN-AM SPYDER RT-RTS 2010 TO 2014 SE5 SM5

TOP COLD AIR ENTRY VENTS COMPLETE PANEL (SET), THESE PANELS WHERE BUILT TO BRING EXTRA AIR INTO THE ENGINE COMPARTMENT TO COOL DOWN

ON PRIMER NOT PAINTED FOR YOUR CUSTOM COLORS

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CART-SP-260-PR

Description: FITS CAN-AM SPYDER RT-RTS 2010 TO 2014 SE5 SM5

REPLACES YOUR ORIGINAL PANELS
BUILT TO BRING IN A GREATER AIR FLOW
WILL KEEP ENGINE COOLER WHILE RUNNING

ON PRIMER READY TO PAINT

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CA-SP-202-PR

Description: FITS CAN-AM SPYDER 2008 2009 2010 2011 2012 SM5 (MANUAL) FOR CORBIN BAGS

INCLUDED IN KIT: HEEL & TOE SHIFTER, RELOCATED HAND BRAKE, RELOCATED BRAKE PEDAL

ON PRIMER NOT PAINTED FOR YOUR CUSTOM COLORS

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

$160.00 CDN REBATE WHEN RETURNING YOUR BRAKE ASSEMBLY AND SHIFTER

Manufactured by Vertika Trykes Canada

Stock #: CA-PCB-510-SG

Description: FITS CAN-AM SPYDER 2008 2009 2010 2011 2012 SE5 SM5

THESE WERE BUILT TO GIVE ALSO THE PASSENGER THE ULTIMATE COMFORT THEY MATCH NICELY WITH ITEM # CA-HCB-500-PR

PAINTED STONE GUARD

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CART-HCB-560-PR

Description: FITS CAN-AM SPYDER RT-RTS 2010 2011 2012 SE5 SM5

THE BABY OF OUR RUNNING BOARDS COMFORT BOARDS , HIGHWAY COMFORT BOARDS
TWO ENTRY VENTS
SMALLER VERSION NOT FULL BOARDS WILL NOT HIDE YOUR ALUMINUN SIDE FOR THE ONE WHO CHROME THEM
CARRIES DRIVER WEIGHT, YOU CAN STAND ON THESE

ON PRIMER READY TO PAINT

**INSTALATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CA-SPS-204-PR

Description: FITS CAN-AM SPYDER 2008 2009 2010 2011 2012 SE5 SM5

ON PRIMER NOT PAINTED FOR YOUR CUSTOM COLORS
THIS PANEL TAKES THE HOT AIR AWAY FROM YOUR FEET

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CA-MTV-302-PR

Description: FITS CAN-AM SPYDER 2008 2009 2010 2011 2012 SE5 SM5

ON PRIMER NOT PAINTED FOR YOUR CUSTOM COLORS
WAS BUILT TO BRING EXTRA COLD AIR IN THE ENGINE AREA

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

anufactered by Vertika Trykes Canada

Stock #: CA-GBYP-303-PR

Description: FITS CAN-AM SPYDER 2008 2009 2010 2011 2012 SE5 SM5

GLOVE BOX EXTRA LOCKABLE SPACE FOR WALLET IPOD MP3 PLAYERS GPS GIVES THE SPYDER A SPORTIER, REPLACES YOUR ORIGINAL Y PANEL LOOK

ON PRIMER NOT PAINTED FOR YOUR CUSTOM COLORS

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CAST-FN-120-PR

Description: FITS CAN-AM SPYDER ST-STS 2013 AND UP SE5 SM5

THE NEW NOSE FOR YOUR SPYDER ST- STS BRINGS YOUR SPYDER TO A DIFFERENT CUSTOMIZED LOOK BRINGS EXTRA COLD AIR TO COOL OFF THE ST
INCORPORATED FRONT SPOILER
TWO ENTRY VENTS FITS WITH TRIC LEDS HIGH INTENSITY LED ON FENDER IMAGINE THIS PIECE LID UP

ON PRIMER READY TO PAINT

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CART-SFS-760-PR

Description: FITS CAN-AM SPYDER RT-RTS 2010 2011 2012 SE5 SM5
FITS ON THE TOP OF VERTIKA BACK SPOILER ITEM # CART-BSBL-750-PR WE CALL IT THE BACK DRAFT ELIMINATOR

ON PRIMER NOT PAINTED FOR YOUR CUSTOM COLORS

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CART-14-FN-150-PR

Description: FITS CAN-AM SPYDER RT-RTS 2014 SE5 SM5

THE NEW NOSE FOR YOUR SPYDER RT 2014 BRINGS YOUR SPYDER TO A DIFFERENT CUSTOMIZED LOOK BRINGS EXTRA COLD AIR TO COOL OFF THE RADS
INCORPORATED FRONT SPOILER
THREE ENTRY VENTS FITS WITH TRIC LEDS HIGH INTENSITY LED ON FENDER IMAGINE THIS PIECE LID UP

ON PRIMER READY TO PAINT

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CA-RFS-SAC-730-PR

Description:
PACKAGE DEAL
REAR FENDER SPORT WITH SWING ARM COVERSFITS CAN-AM SPYDER 2008 2009 2010 2011 SE5 SM5

SEE DESCRIPTION ON ITEM# CA-RFS-710-PR AND CA-SAC-720-PR
FOR MORE DETAILS SEE PHOTOS SECTION

ON PRIMER READY TO BE PAINTED

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CART-RB-550-PR

Description: FITS CAN-AM SPYDER RT-RTS 2010 2011 2012 SE5 SM5

THE ULTIMATE COMFORT BOARDS MULTI POSITION BOARDS
INCORPORATED HIGHWAY COMFORT BOARDS
TWO ENTRY VENTS

ON PRIMER READY TO PAINT

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CA-FN-100-PR

Description: FITS CAN-AM SPYDER 2008 2009 2010 2011 2012 SE5 SM5

ON PRIMER NOT PAINTED FOR YOUR CUSTOM COLORS

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED
**FOG LIGHTS NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CA-RFWS-701-PR

Description: COMES COMPLETE WITH PLATE HOLDER WITH LIGHT PLUS SPOILER WITH LED BRAKE LIGHT

ON PRIMER READY TO BE PAINTED

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Kuryakyn plate holder not included

Manufactured by Vertika Trykes Canada

Stock #: CA-SAC-720-PR

Description: FITS CAN-AM SPYDER 2008 2009 2010 2011 2012 SE5 SM5

GIVES A FINISHED LOOK FOR THOSE WHO REMOVED THE BACK FENDER
LEFT SIDE STRAP PROTECTOR (will fit with SPYDERPOP the missing belt guard SPY102)
RIGHT SIDE IS A DISC BRAKE COOLER ALSO HIDES THE BRAKE BRACKETS
EASY TO TRIM TO FIT THE TRAILER HITCH BRACKETS
FOR MORE DETAILS SEE PHOTOS SECTION

ON PRIMER READY TO BE PAINTED

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CA-RFS-710-PR

Description: FITS CAN-AM SPYDER 2008 2009 2010 2011 2012 SE5 SM5

WAS BUILT FOR THE ONES THAT REMOVED THE BACK FENDER BUT DONT WANT A SHOWER,FITS EXACTLY UNDER THE SPYDER WITH THE SAME 7 SCREWS YOU WILL REMOVE THE EXISTING PANEL GIVES A NICE SPORT LOOK

FITS WITH BRP TAIL,BRP BACK REST, WILL ALSO FIT WITH V.T.C.REAR BACK PANELS ITEM# CA-RBPS-800-PR

LED BRAKE LIGHT OPTIONAL NOT INCLUDED V.T.C. ITEM #CA-RFSBL-711

ON PRIMER READY TO BE PAINTED

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CA-AP-900-PR

Description: FITS CAN-AM SPYDER 2008 2009 2010 2012 SE5 SM5

NO AUDIO EQUIPMENT SUPPLIED

EASY INSTALLATION AUDIO PACK ACCEPTS SIX AND A HALF INCH SPEAKER AND A MARINE RADIO
ROOM FOR ALOCATING GPS AND IPOD
RELOCATES THE MIRRORS HIGHER AND WIDER
RELOCATES THE GAUGES FOR BETTER VIEW
KEEPS THE WINDSHIELD YOU ALREADY BOUGHT

ON PRIMER READY TO BE PAINTED

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CART-TV-350-PR

Description: FITS CAN-AM SPYDER RT-RTS 2010 2011 2012 SE5 SM5

REPLACES THE LEXAN PIECE THAT REDUCES COLD AIR ENTRY TO THE VENT
WILL ALSO DEFLECT AIR AWAY FROM DRIVER

NOT PAINTED FOR YOUR CUSTOM COLORS

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CA-RBPS-800-PR

Description: FITS CAN-AM SPYDER 2008 2009 2010 2011 2012 SE5 SM5

NEW BACK LOOK WITH INCORPORATED ROUND LIGHTS, AND AIR PORT, PANELS WILL ACCEPT 6X9 MARINE SPEAKER

TWO COVERS ARE SUPPLIED TO COVER THE SPEAKER AREA IF NOT USED

ON PRIMER READY TO BE PAINTED

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CAST-SV-320-PR

Description: FITS CAN-AM SPYDER ST STS 2013 AND UP SE5 SM5

REPLACES YOUR ORIGINAL PANELS
BUILT TO BRING IN A GREATER AIR FLOW
WILL KEEP ENGINE COOLER WHILE RUNNING

ON PRIMER READY TO PAINT

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CART-BSBL-750-PR

Description: FITS CAN-AM SPYDER RT-RTS 2010 2011 2012 SE5 SM5
FITS ON THE TOP CASE ADDED LED BRAKE LIGHT FOR MORE VISIBILITY

ON PRIMER NOT PAINTED FOR YOUR CUSTOM COLORS

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CART-TCAED-PR

Description: FITS CAN-AM SPYDER RT-RTS 2010 TO 2014 SE5 SM5

ONLY FITS OUR PART # CART-TV-360-PR
BRINGS A BREEZE TO THE DRIVER
WILL ALLOW YOU TO CONTROL THE BREEZE YOU WANT TO FEEL WHILE DRIVING

ON PRIMER READY TO PAINT

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CAST-FBAUTO-521-PR

Description: FITS CAN-AM SPYDER ST- STS 2013 AND UP AUTOMATIC 5 SPEED

THE ULTIMATE COMFORT BOARDS MULTI POSITION>RUNNING BOARDS
INCORPORATED HIGHWAY COMFORT BOARDS
TWO ENTRY VENTS

ON PRIMER READY TO PAINT

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CART-SVD

Description: FITS ONLY ON THE NEW SIDE PANELS ITEM # CART-SP-260-PR

INSTALLED ON TOP OF THE SIDE PANELS
BUILT TO BRING CONTROLLABLE AIR TO THE DRIVER
WILL KEEP DRIVER COOLER

ON PRIMER READY TO PAINT

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CA-622-SPOIL-PR

Description: FITS CAN-AM TRAILER RT-622 2010 TO 2014

SPOILER FOR RT-622 TRAILER WITH DOUBLE LEDS IN BACK.

ON PRIMER NOT PAINTED FOR YOUR CUSTOM COLORS

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CART-FF-450-PR

Description: FITS CAN-AM SPYDER RT-RTS 2010 2011 2012 SE5 SM5br

FITS ON STOCK BRACKETS GIVES THE SPYDER A ALL NEW LOOK
FRONT ENTRY BRAKE COOLERS REAR AIR EXIT PORTS

ON PRIMER READY TO BE PAINTED

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CA-RSRBPS-801-PR

Description:
FITS VERTIKA REAR BACK PANELS ITEM # CA-RBPS-800-PR

COMES COMPLETE WITH LISENCE PLATE HOLDER AND AREA FOR LED BRAKE LIGHT NOT INCLUDED

FOR MORE DETAILS SEE PHOTOS SECTION

ON PRIMER READY TO BE PAINTED

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CA-SP-200-PR

Description: FITS CAN-AM SPYDER 2008 2009 2010 2011 2012 SM5 (MANUAL)

INCLUDED IN KIT: HEEL & TOE SHIFTER, RELOCATED HAND BRAKE, RELOCATED BRAKE PEDAL

ON PRIMER NOT PAINTED FOR YOUR CUSTOM COLORS

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

$160.00 CDN REBATE WHEN RETURNING YOUR BRAKE ASSEMBLY AND SHIFTER

Manufactured by Vertika Trykes Canada

Stock #: CART-CFBP-250-PR

Description: FITS CAN-AM SPYDER RT-RTS 2010 2011 2012 SE5 SM5

THE HOT AIR ELIMINATOR 5 PIECE SET
FRONT ENTRY VENTS TO BRING IN MORE COLD AIR
FITS ON STOCK SPYDER ,WILL FUNCTION GREAT WITH OUR RUNNING BOARDS OR HIGHWAY COMFORT BOARDS

ON STOCK SPYDER WE ARE RECOMENDING TO DRILL HOLES OR REMOVE THE PLASTIC COVER UNDERNEATH
ON PRIMER READY TO BE PAINTED

**INSTALLATION NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CA-HS-600-PR

Description: FITS CAN-AM SPYDER 2008 2009 2010 2011 2012 SE5 SM5

FUNCTIONAL AIR INTAKES TO BRING AIR IN TO THE MINI TOP VENTS FITS WITH VERTIKA ITEM# CA-MTV-302 AND THE ORIGINAL SPYDER FRONT FOR MORE DETAILS SEE PHOTOS SECTION

ON PRIMER NOT PAINTED FOR YOUR CUSTOM COLORS

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CA-RFS-702-PR

Description: FITS VERTIKA REAR FENDER ITEM# CA-RF-700

COMES COMPLETE WITH LED BRAKE LIGHT

FOR MORE DETAILS SEE PHOTOS SECTION

ON PRIMER READY TO BE PAINTED

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CA-TVS-301-PR

Description: FITS CAN-AM SPYDER 2008 2009 2010 2011 2012 SE5 SM5

ON PRIMER NOT PAINTED FOR YOUR CUSTOM COLORS
THIS PANEL WAS BUILT TO BRING EXTRA COLD AIR IN THE ENGINE AREA FITS NICELY WITH ITEM# CA-SPS-204-PR AND CA-HCB-500-PR GIVES IT THAT NICE SPORT LOOK JUST REMOVE YOUR PANEL AND PUT THIS ONE IN

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactered by Vertika Trykes Canada

Stock #: CAST-FBMAN-520-PR

Description: FITS CAN-AM SPYDER ST- STS 2013 AND UP MANUAL 5 SPEED

THE ULTIMATE COMFORT BOARDS MULTI POSITION>RUNNING BOARDS
INCORPORATED HIGHWAY COMFORT BOARDS
TWO ENTRY VENTS

ON PRIMER READY TO PAINT

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CA-RF-700-PR

Description: FITS CAN-AM SPYDER 2008 2009 2010 2011 2012 SE5 SM5

ONE PIECE CONSTRUCTION TO OUTSTAND THE VIBRATIONS
COMES COMPLETE WITH PLATE HOLDER WITH PLATE LIGHT
YOU WILL NEVER BREAK YOUR BRACKETS AGAIN

ON PRIMER READY TO BE PAINTED

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CA-HCB-500-PR

Description: FITS CAN-AM SPYDER 2008 2009 2010 2011 2012 SE5 SM5

THE ULTIMATE COMFORT IN HIGHWAY BOARDS CARRIES DRIVER WEIGHT

ON PRIMER NOT PAINTED FOR YOUR CUSTOM COLORS

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CA-RFSBL-711

Description: FITS EXACTLY ON THE REAR FENDER SPORT ITEM# CA-RFS-710-PR

USED AS A THIRD BRAKE LIGHT FOR SAFETY

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: CA-SP-203-PR

Description: FITS CAN-AM SPYDER 2008 2009 2010 2011 2012 SE5 (AUTOMATIC) FOR CORBIN BAGS

INCLUDED IN KIT: RELOCATED HAND BRAKE RELOCATED BRAKE PEDAL

ON PRIMER NOT PAINTED FOR YOUR CUSTOM COLORS

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

$80.00 CDN REBATE WHEN RETURNING YOUR BRAKE ASSEMBLY

Manufactured by Vertika Trykes Canada

Stock #: CA-SP-201-PR

Description: FITS CAN-AM SPYDER 2008 2009 2010 2011 2012 SE5 (AUTOMATIC)

INCLUDED IN KIT: RELOCATED HAND BRAKE RELOCATED BRAKE PEDAL

ON PRIMER NOT PAINTED FOR YOUR CUSTOM COLORS

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

$80.00 CDN REBATE WHEN RETURNING YOUR BRAKE ASSEMBLY

Manufactured by Vertika Trykes Canada

Stock #: CART-BSBL-760-PR

Description: FITS CAN-AM SPYDER RT-RTS 2010 TO 2014 SE5 SM5

NEW ONE PIECE BACK SPOILER WITH LED LIGHT PREVENTS BACK DRAFT

ON PRIMER NOT PAINTED FOR YOUR CUSTOM COLORS

**INSTALLATION NOT INCLUDED
**SHIPPING AND HANDLING NOT INCLUDED

Manufactured by Vertika Trykes Canada

Stock #: BBP-H41-151CC

Description: Concealed carry is made easy with Hopnel’s™ new EZ Carry™ concealed carry pouch system. Carrying while riding is a choice many of us make, but it can be uncomfortable, difficult to access, and hard to remove without brandishing. Until now, there hasn’t been an easy way to transfer your protection from person to bike and still have it accessible. The new EZ Carry™ pouch system from Hopnel™ puts a concealed carry pouch on your motorcycle with great access. Our Buddy-Lok Tactical Mount makes attachment to the bike mount a snap and with a quick twist you can transfer the entire pouch with firearm concealed to the included belt holder, without the concern of brandishing. It actually looks like many of our other wearable pouches or nothing more than a fancy cell phone pouch. The EZ Carry™ pouch measures 6 1/2” x 4 1/2” x 1 1/8” and accommodates most sub compact pistols such as: Ruger LC9 & LC380, Glock 42, Sig P938 & P238, Colt Mustang and S & W Shield. For the GL1500 Gold Wing and Can-Am Spyder RT. Made in the USA.

EZ CARRY CONCEALED POUCH, Fits Most Sub-Compacts, Can Am RT/ GL1500 Gold Wing, 6 1/2" x 4 1/2" x 1 1/8"